lkml.org 
[lkml]   [2020]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] tpm: tpm_tis_spi: set cs_change = 0 when timesout
Date
when i reach TPM_RETRY, the cs cannot  change back to 'high'.So the TPM chips thinks this communication is not over. 
And next times communication cannot be effective because the communications mixed up with the last time.

Signed-off-by: wanghongzhe <wanghongzhe@huawei.com>
---
drivers/char/tpm/tpm_tis_spi.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/char/tpm/tpm_tis_spi.c b/drivers/char/tpm/tpm_tis_spi.c
index d1754fd..a1ae4f6 100644
--- a/drivers/char/tpm/tpm_tis_spi.c
+++ b/drivers/char/tpm/tpm_tis_spi.c
@@ -67,7 +67,14 @@ static int tpm_tis_spi_flow_control(struct tpm_tis_spi_phy *phy,
}

if (i == TPM_RETRY)
+ {
+ spi_xfer.cs_change = 0;
+ spi_xfer->len = 1;
+ spi_message_init(&m);
+ spi_message_add_tail(spi_xfer, &m);
+ ret = spi_sync_locked(phy->spi_device, &m);
return -ETIMEDOUT;
+ }
}

return 0;
--
1.7.12.4
\
 
 \ /
  Last update: 2020-01-14 12:57    [W:0.035 / U:3.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site