lkml.org 
[lkml]   [2020]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 4/7] dt-bindings: atmel-usart: remove wildcard
Date


On 14.01.2020 12:42, Alexandre Belloni wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> On 14/01/2020 12:23:14+0200, Claudiu Beznea wrote:
>> Remove chip whildcard and introduce the list of compatibles instead.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>> ---
>> Documentation/devicetree/bindings/mfd/atmel-usart.txt | 7 +++----
>> 1 file changed, 3 insertions(+), 4 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
>> index 699fd3c9ace8..778e8310606a 100644
>> --- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt
>> +++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
>> @@ -1,10 +1,9 @@
>> * Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
>>
>> Required properties for USART:
>> -- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu"
>> - The compatible <chip> indicated will be the first SoC to support an
>> - additional mode or an USART new feature.
>> - For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart"
>> +- compatible: Should be one of the following:
>> + - "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart"
>> + - "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"
>
> All the uarts are not dbgus, so this need to be:
>
> - "atmel,at91rm9200-usart"
> - "atmel,at91sam9260-usart"
> - "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart"
> - "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"

Ok!

>
> Also, you need to update drivers/soc/atmel/soc.c

OK. Did you refer to CIDR, EXID registers? They are at the same offsets as
for the old products. So we can rely on old compatible for them. Is this OK?

Thank you,
Claudiu Beznea

>
>> - reg: Should contain registers location and length
>> - interrupts: Should contain interrupt
>> - clock-names: tuple listing input clock names.
>> --
>> 2.7.4
>>
>
> --
> Alexandre Belloni, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
>
\
 
 \ /
  Last update: 2020-01-14 12:11    [W:0.061 / U:40.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site