lkml.org 
[lkml]   [2020]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net] net: hns3: pad the short frame before sending to the hardware
Date
From: Yunsheng Lin <linyunsheng@huawei.com>

The hardware can not handle short frames below or equal to 32
bytes according to the hardware user manual, and it will trigger
a RAS error when the frame's length is below 33 bytes.

This patch pads the SKB when skb->len is below 33 bytes before
sending it to hardware.

Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 69545dd..b3deb5e 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -54,6 +54,8 @@ MODULE_PARM_DESC(debug, " Network interface message level setting");
#define HNS3_INNER_VLAN_TAG 1
#define HNS3_OUTER_VLAN_TAG 2

+#define HNS3_MIN_TX_LEN 33U
+
/* hns3_pci_tbl - PCI Device ID Table
*
* Last entry must be all 0s
@@ -1405,6 +1407,10 @@ netdev_tx_t hns3_nic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
int bd_num = 0;
int ret;

+ /* Hardware can only handle short frames above 32 bytes */
+ if (skb_put_padto(skb, HNS3_MIN_TX_LEN))
+ return NETDEV_TX_OK;
+
/* Prefetch the data used later */
prefetch(skb->data);

--
2.7.4
\
 
 \ /
  Last update: 2020-01-15 03:47    [W:0.034 / U:25.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site