lkml.org 
[lkml]   [2020]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH V2 2/3] dt-bindings: pinctrl: Convert i.MX8MM to json-schema
Date
Hi, Rob

> Subject: Re: [PATCH V2 2/3] dt-bindings: pinctrl: Convert i.MX8MM to json-
> schema
>
> On Fri, Jan 10, 2020 at 12:05:19PM +0800, Anson Huang wrote:
> > Convert the i.MX8MM pinctrl binding to DT schema format using
> > json-schema
> >
> > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> > ---
> > Changes since V1:
> > - use "grp$" instead of "-grp$";
> > - use space instead of tab for "ref$";
> > - add missed "reg" property;
> > - remove the "maxItem" for "fsl,pins" to avoid build warning, as the
> item number is changable.
> > ---
> > .../bindings/pinctrl/fsl,imx8mm-pinctrl.txt | 36 -----------
> > .../bindings/pinctrl/fsl,imx8mm-pinctrl.yaml | 69
> ++++++++++++++++++++++
> > 2 files changed, 69 insertions(+), 36 deletions(-) delete mode
> > 100644
> > Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt
> > create mode 100644
> > Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt
> > b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt
> > deleted file mode 100644
> > index e4e01c0..0000000
> > --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt
> > +++ /dev/null
> > @@ -1,36 +0,0 @@
> > -* Freescale IMX8MM IOMUX Controller
> > -
> > -Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this
> > directory -for common binding part and usage.
> > -
> > -Required properties:
> > -- compatible: "fsl,imx8mm-iomuxc"
> > -- reg: should contain the base physical address and size of the
> > iomuxc
> > - registers.
> > -
> > -Required properties in sub-nodes:
> > -- fsl,pins: each entry consists of 6 integers and represents the mux
> > and config
> > - setting for one pin. The first 5 integers <mux_reg conf_reg
> > input_reg mux_val
> > - input_val> are specified using a PIN_FUNC_ID macro, which can be
> > found in
> > - <arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h>. The last integer
> > CONFIG is
> > - the pad setting value like pull-up on this pin. Please refer to
> > i.MX8M Mini
> > - Reference Manual for detailed CONFIG settings.
> > -
> > -Examples:
> > -
> > -&uart1 {
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&pinctrl_uart1>;
> > -};
> > -
> > -iomuxc: pinctrl@30330000 {
> > - compatible = "fsl,imx8mm-iomuxc";
> > - reg = <0x0 0x30330000 0x0 0x10000>;
> > -
> > - pinctrl_uart1: uart1grp {
> > - fsl,pins = <
> > - MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
> > - MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
> > - >;
> > - };
> > -};
> > diff --git
> > a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
> > b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
> > new file mode 100644
> > index 0000000..a3c4275
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yam
> > +++ l
> > @@ -0,0 +1,69 @@
> > +# SPDX-License-Identifier: GPL-2.0-or-later
>
> Sorry, one other thing.
>
> You're good with GPLv9? Plus this is a license change. Do you have rights to
> do so as some of this comes from the old binding doc? If you do, then make

Yes, it should be GPL-2.0, will fix it in V3.

Thanks,
Anson
\
 
 \ /
  Last update: 2020-01-15 02:36    [W:0.055 / U:0.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site