lkml.org 
[lkml]   [2020]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V2 2/3] dt-bindings: pinctrl: Convert i.MX8MM to json-schema
On Fri, Jan 10, 2020 at 12:05:19PM +0800, Anson Huang wrote:
> Convert the i.MX8MM pinctrl binding to DT schema format using json-schema
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> Changes since V1:
> - use "grp$" instead of "-grp$";
> - use space instead of tab for "ref$";
> - add missed "reg" property;
> - remove the "maxItem" for "fsl,pins" to avoid build warning, as the item number is changable.
> ---
> .../bindings/pinctrl/fsl,imx8mm-pinctrl.txt | 36 -----------
> .../bindings/pinctrl/fsl,imx8mm-pinctrl.yaml | 69 ++++++++++++++++++++++
> 2 files changed, 69 insertions(+), 36 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt
> create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt
> deleted file mode 100644
> index e4e01c0..0000000
> --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt
> +++ /dev/null
> @@ -1,36 +0,0 @@
> -* Freescale IMX8MM IOMUX Controller
> -
> -Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
> -for common binding part and usage.
> -
> -Required properties:
> -- compatible: "fsl,imx8mm-iomuxc"
> -- reg: should contain the base physical address and size of the iomuxc
> - registers.
> -
> -Required properties in sub-nodes:
> -- fsl,pins: each entry consists of 6 integers and represents the mux and config
> - setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
> - input_val> are specified using a PIN_FUNC_ID macro, which can be found in
> - <arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h>. The last integer CONFIG is
> - the pad setting value like pull-up on this pin. Please refer to i.MX8M Mini
> - Reference Manual for detailed CONFIG settings.
> -
> -Examples:
> -
> -&uart1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_uart1>;
> -};
> -
> -iomuxc: pinctrl@30330000 {
> - compatible = "fsl,imx8mm-iomuxc";
> - reg = <0x0 0x30330000 0x0 0x10000>;
> -
> - pinctrl_uart1: uart1grp {
> - fsl,pins = <
> - MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
> - MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
> - >;
> - };
> -};
> diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
> new file mode 100644
> index 0000000..a3c4275
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
> @@ -0,0 +1,69 @@
> +# SPDX-License-Identifier: GPL-2.0-or-later

Sorry, one other thing.

You're good with GPLv9? Plus this is a license change. Do you have
rights to do so as some of this comes from the old binding doc? If you
do, then make it:

(GPL-2.0-only OR BSD-2-Clause)

Rob

\
 
 \ /
  Last update: 2020-01-15 01:12    [W:0.044 / U:2.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site