lkml.org 
[lkml]   [2020]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH v1 1/3] dt-bindings: mmc: combine common mmc and dw-mshc properties
Date
Combine the common properties for mmc and dw-mshc in
mmc-controller-common.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
.../bindings/mmc/mmc-controller-common.yaml | 342 +++++++++++++++++++++
.../devicetree/bindings/mmc/mmc-controller.yaml | 335 +-------------------
2 files changed, 346 insertions(+), 331 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mmc/mmc-controller-common.yaml

diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller-common.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller-common.yaml
new file mode 100644
index 000000000..92e5c3129
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-controller-common.yaml
@@ -0,0 +1,342 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mmc-controller-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MMC Controller Common Properties
+
+maintainers:
+ - Ulf Hansson <ulf.hansson@linaro.org>
+
+properties:
+ "#address-cells":
+ const: 1
+ description: |
+ The cell is the slot ID if a function subnode is used.
+
+ "#size-cells":
+ const: 0
+
+ # Card Detection.
+ # If none of these properties are supplied, the host native card
+ # detect will be used. Only one of them should be provided.
+
+ broken-cd:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ There is no card detection available; polling must be used.
+
+ cd-gpios:
+ description:
+ The card detection will be done using the GPIO provided.
+
+ non-removable:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Non-removable slot (like eMMC); assume always present.
+
+ # *NOTE* on CD and WP polarity. To use common for all SD/MMC host
+ # controllers line polarity properties, we have to fix the meaning
+ # of the "normal" and "inverted" line levels. We choose to follow
+ # the SDHCI standard, which specifies both those lines as "active
+ # low." Therefore, using the "cd-inverted" property means, that the
+ # CD line is active high, i.e. it is high, when a card is
+ # inserted. Similar logic applies to the "wp-inverted" property.
+ #
+ # CD and WP lines can be implemented on the hardware in one of two
+ # ways: as GPIOs, specified in cd-gpios and wp-gpios properties, or
+ # as dedicated pins. Polarity of dedicated pins can be specified,
+ # using *-inverted properties. GPIO polarity can also be specified
+ # using the GPIO_ACTIVE_LOW flag. This creates an ambiguity in the
+ # latter case. We choose to use the XOR logic for GPIO CD and WP
+ # lines. This means, the two properties are "superimposed," for
+ # example leaving the GPIO_ACTIVE_LOW flag clear and specifying the
+ # respective *-inverted property property results in a
+ # double-inversion and actually means the "normal" line polarity is
+ # in effect.
+ wp-inverted:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The Write Protect line polarity is inverted.
+
+ cd-inverted:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The CD line polarity is inverted.
+
+ # Other properties
+
+ bus-width:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [1, 4, 8]
+ default: 1
+ description:
+ Number of data lines.
+
+ max-frequency:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 400000
+ - maximum: 200000000
+ description:
+ Maximum operating frequency of the bus.
+
+ disable-wp:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ When set, no physical write-protect line is present. This
+ property should only be specified when the controller has a
+ dedicated write-protect detection logic. If a GPIO is always used
+ for the write-protect detection logic, it is sufficient to not
+ specify the wp-gpios property in the absence of a write-protect
+ line. Not used in combination with eMMC or SDIO.
+
+ wp-gpios:
+ description:
+ GPIO to use for the write-protect detection.
+
+ cd-debounce-delay-ms:
+ description:
+ Set delay time before detecting card after card insert
+ interrupt.
+
+ no-1-8-v:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ When specified, denotes that 1.8V card voltage is not supported
+ on this system, even if the controller claims it.
+
+ cap-sd-highspeed:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ SD high-speed timing is supported.
+
+ cap-mmc-highspeed:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ MMC high-speed timing is supported.
+
+ sd-uhs-sdr12:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ SD UHS SDR12 speed is supported.
+
+ sd-uhs-sdr25:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ SD UHS SDR25 speed is supported.
+
+ sd-uhs-sdr50:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ SD UHS SDR50 speed is supported.
+
+ sd-uhs-sdr104:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ SD UHS SDR104 speed is supported.
+
+ sd-uhs-ddr50:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ SD UHS DDR50 speed is supported.
+
+ cap-power-off-card:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Powering off the card is safe.
+
+ cap-mmc-hw-reset:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ eMMC hardware reset is supported
+
+ cap-sdio-irq:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ enable SDIO IRQ signalling on this interface
+
+ full-pwr-cycle:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Full power cycle of the card is supported.
+
+ mmc-ddr-1_2v:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ eMMC high-speed DDR mode (1.2V I/O) is supported.
+
+ mmc-ddr-1_8v:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ eMMC high-speed DDR mode (1.8V I/O) is supported.
+
+ mmc-ddr-3_3v:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ eMMC high-speed DDR mode (3.3V I/O) is supported.
+
+ mmc-hs200-1_2v:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ eMMC HS200 mode (1.2V I/O) is supported.
+
+ mmc-hs200-1_8v:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ eMMC HS200 mode (1.8V I/O) is supported.
+
+ mmc-hs400-1_2v:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ eMMC HS400 mode (1.2V I/O) is supported.
+
+ mmc-hs400-1_8v:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ eMMC HS400 mode (1.8V I/O) is supported.
+
+ mmc-hs400-enhanced-strobe:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ eMMC HS400 enhanced strobe mode is supported
+
+ dsr:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 0
+ - maximum: 0xffff
+ description:
+ Value the card Driver Stage Register (DSR) should be programmed
+ with.
+
+ no-sdio:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Controller is limited to send SDIO commands during
+ initialization.
+
+ no-sd:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Controller is limited to send SD commands during initialization.
+
+ no-mmc:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Controller is limited to send MMC commands during
+ initialization.
+
+ fixed-emmc-driver-type:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 0
+ - maximum: 4
+ description:
+ For non-removable eMMC, enforce this driver type. The value is
+ the driver type as specified in the eMMC specification (table
+ 206 in spec version 5.1)
+
+ post-power-on-delay-ms:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - default: 10
+ description:
+ It was invented for MMC pwrseq-simple which could be referred to
+ mmc-pwrseq-simple.txt. But now it\'s reused as a tunable delay
+ waiting for I/O signalling and card power supply to be stable,
+ regardless of whether pwrseq-simple is used. Default to 10ms if
+ no available.
+
+ supports-cqe:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The presence of this property indicates that the corresponding
+ MMC host controller supports HW command queue feature.
+
+ disable-cqe-dcmd:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The presence of this property indicates that the MMC
+ controller\'s command queue engine (CQE) does not support direct
+ commands (DCMDs).
+
+ keep-power-in-suspend:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ SDIO only. Preserves card power during a suspend/resume cycle.
+
+ # Deprecated: enable-sdio-wakeup
+ wakeup-source:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ SDIO only. Enables wake up of host system on SDIO IRQ assertion.
+
+ vmmc-supply:
+ description:
+ Supply for the card power
+
+ vqmmc-supply:
+ description:
+ Supply for the bus IO line power
+
+ mmc-pwrseq:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ System-on-Chip designs may specify a specific MMC power
+ sequence. To successfully detect an (e)MMC/SD/SDIO card, that
+ power sequence must be maintained while initializing the card.
+
+patternProperties:
+ "^.*@[0-9]+$":
+ type: object
+ description: |
+ On embedded systems the cards connected to a host may need
+ additional properties. These can be specified in subnodes to the
+ host controller node. The subnodes are identified by the
+ standard \'reg\' property. Which information exactly can be
+ specified depends on the bindings for the SDIO function driver
+ for the subnode, as specified by the compatible string.
+
+ properties:
+ compatible:
+ description: |
+ Name of SDIO function following generic names recommended
+ practice
+
+ reg:
+ items:
+ - minimum: 0
+ maximum: 7
+ description:
+ Must contain the SDIO function number of the function this
+ subnode describes. A value of 0 denotes the memory SD
+ function, values from 1 to 7 denote the SDIO functions.
+
+ broken-hpi:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Use this to indicate that the mmc-card has a broken hpi
+ implementation, and that hpi should not be used.
+
+ required:
+ - reg
+
+ "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$":
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 2
+ items:
+ minimum: 0
+ maximum: 359
+ description:
+ Set the clock (phase) delays which are to be configured in the
+ controller while switching to particular speed mode. These values
+ are in pair of degrees.
+
+dependencies:
+ cd-debounce-delay-ms: [ cd-gpios ]
+ fixed-emmc-driver-type: [ non-removable ]
diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index 3c0df4016..6c7085395 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -14,341 +14,14 @@ description: |
that requires the respective functionality should implement them using
these definitions.

+allOf:
+ - $ref: "mmc-controller-common.yaml"
+
+# Everything else is described in the common file
properties:
$nodename:
pattern: "^mmc(@.*)?$"

- "#address-cells":
- const: 1
- description: |
- The cell is the slot ID if a function subnode is used.
-
- "#size-cells":
- const: 0
-
- # Card Detection.
- # If none of these properties are supplied, the host native card
- # detect will be used. Only one of them should be provided.
-
- broken-cd:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- There is no card detection available; polling must be used.
-
- cd-gpios:
- description:
- The card detection will be done using the GPIO provided.
-
- non-removable:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- Non-removable slot (like eMMC); assume always present.
-
- # *NOTE* on CD and WP polarity. To use common for all SD/MMC host
- # controllers line polarity properties, we have to fix the meaning
- # of the "normal" and "inverted" line levels. We choose to follow
- # the SDHCI standard, which specifies both those lines as "active
- # low." Therefore, using the "cd-inverted" property means, that the
- # CD line is active high, i.e. it is high, when a card is
- # inserted. Similar logic applies to the "wp-inverted" property.
- #
- # CD and WP lines can be implemented on the hardware in one of two
- # ways: as GPIOs, specified in cd-gpios and wp-gpios properties, or
- # as dedicated pins. Polarity of dedicated pins can be specified,
- # using *-inverted properties. GPIO polarity can also be specified
- # using the GPIO_ACTIVE_LOW flag. This creates an ambiguity in the
- # latter case. We choose to use the XOR logic for GPIO CD and WP
- # lines. This means, the two properties are "superimposed," for
- # example leaving the GPIO_ACTIVE_LOW flag clear and specifying the
- # respective *-inverted property property results in a
- # double-inversion and actually means the "normal" line polarity is
- # in effect.
- wp-inverted:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- The Write Protect line polarity is inverted.
-
- cd-inverted:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- The CD line polarity is inverted.
-
- # Other properties
-
- bus-width:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [1, 4, 8]
- default: 1
- description:
- Number of data lines.
-
- max-frequency:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 400000
- - maximum: 200000000
- description:
- Maximum operating frequency of the bus.
-
- disable-wp:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- When set, no physical write-protect line is present. This
- property should only be specified when the controller has a
- dedicated write-protect detection logic. If a GPIO is always used
- for the write-protect detection logic, it is sufficient to not
- specify the wp-gpios property in the absence of a write-protect
- line. Not used in combination with eMMC or SDIO.
-
- wp-gpios:
- description:
- GPIO to use for the write-protect detection.
-
- cd-debounce-delay-ms:
- description:
- Set delay time before detecting card after card insert
- interrupt.
-
- no-1-8-v:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- When specified, denotes that 1.8V card voltage is not supported
- on this system, even if the controller claims it.
-
- cap-sd-highspeed:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- SD high-speed timing is supported.
-
- cap-mmc-highspeed:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- MMC high-speed timing is supported.
-
- sd-uhs-sdr12:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- SD UHS SDR12 speed is supported.
-
- sd-uhs-sdr25:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- SD UHS SDR25 speed is supported.
-
- sd-uhs-sdr50:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- SD UHS SDR50 speed is supported.
-
- sd-uhs-sdr104:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- SD UHS SDR104 speed is supported.
-
- sd-uhs-ddr50:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- SD UHS DDR50 speed is supported.
-
- cap-power-off-card:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- Powering off the card is safe.
-
- cap-mmc-hw-reset:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- eMMC hardware reset is supported
-
- cap-sdio-irq:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- enable SDIO IRQ signalling on this interface
-
- full-pwr-cycle:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- Full power cycle of the card is supported.
-
- mmc-ddr-1_2v:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- eMMC high-speed DDR mode (1.2V I/O) is supported.
-
- mmc-ddr-1_8v:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- eMMC high-speed DDR mode (1.8V I/O) is supported.
-
- mmc-ddr-3_3v:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- eMMC high-speed DDR mode (3.3V I/O) is supported.
-
- mmc-hs200-1_2v:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- eMMC HS200 mode (1.2V I/O) is supported.
-
- mmc-hs200-1_8v:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- eMMC HS200 mode (1.8V I/O) is supported.
-
- mmc-hs400-1_2v:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- eMMC HS400 mode (1.2V I/O) is supported.
-
- mmc-hs400-1_8v:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- eMMC HS400 mode (1.8V I/O) is supported.
-
- mmc-hs400-enhanced-strobe:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- eMMC HS400 enhanced strobe mode is supported
-
- dsr:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- - maximum: 0xffff
- description:
- Value the card Driver Stage Register (DSR) should be programmed
- with.
-
- no-sdio:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- Controller is limited to send SDIO commands during
- initialization.
-
- no-sd:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- Controller is limited to send SD commands during initialization.
-
- no-mmc:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- Controller is limited to send MMC commands during
- initialization.
-
- fixed-emmc-driver-type:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- - maximum: 4
- description:
- For non-removable eMMC, enforce this driver type. The value is
- the driver type as specified in the eMMC specification (table
- 206 in spec version 5.1)
-
- post-power-on-delay-ms:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - default: 10
- description:
- It was invented for MMC pwrseq-simple which could be referred to
- mmc-pwrseq-simple.txt. But now it\'s reused as a tunable delay
- waiting for I/O signalling and card power supply to be stable,
- regardless of whether pwrseq-simple is used. Default to 10ms if
- no available.
-
- supports-cqe:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- The presence of this property indicates that the corresponding
- MMC host controller supports HW command queue feature.
-
- disable-cqe-dcmd:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- The presence of this property indicates that the MMC
- controller\'s command queue engine (CQE) does not support direct
- commands (DCMDs).
-
- keep-power-in-suspend:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- SDIO only. Preserves card power during a suspend/resume cycle.
-
- # Deprecated: enable-sdio-wakeup
- wakeup-source:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- SDIO only. Enables wake up of host system on SDIO IRQ assertion.
-
- vmmc-supply:
- description:
- Supply for the card power
-
- vqmmc-supply:
- description:
- Supply for the bus IO line power
-
- mmc-pwrseq:
- $ref: /schemas/types.yaml#/definitions/phandle
- description:
- System-on-Chip designs may specify a specific MMC power
- sequence. To successfully detect an (e)MMC/SD/SDIO card, that
- power sequence must be maintained while initializing the card.
-
-patternProperties:
- "^.*@[0-9]+$":
- type: object
- description: |
- On embedded systems the cards connected to a host may need
- additional properties. These can be specified in subnodes to the
- host controller node. The subnodes are identified by the
- standard \'reg\' property. Which information exactly can be
- specified depends on the bindings for the SDIO function driver
- for the subnode, as specified by the compatible string.
-
- properties:
- compatible:
- description: |
- Name of SDIO function following generic names recommended
- practice
-
- reg:
- items:
- - minimum: 0
- maximum: 7
- description:
- Must contain the SDIO function number of the function this
- subnode describes. A value of 0 denotes the memory SD
- function, values from 1 to 7 denote the SDIO functions.
-
- broken-hpi:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- Use this to indicate that the mmc-card has a broken hpi
- implementation, and that hpi should not be used.
-
- required:
- - reg
-
- "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$":
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- minItems: 2
- maxItems: 2
- items:
- minimum: 0
- maximum: 359
- description:
- Set the clock (phase) delays which are to be configured in the
- controller while switching to particular speed mode. These values
- are in pair of degrees.
-
-dependencies:
- cd-debounce-delay-ms: [ cd-gpios ]
- fixed-emmc-driver-type: [ non-removable ]
-
examples:
- |
sdhci@ab000000 {
--
2.11.0
\
 
 \ /
  Last update: 2020-01-14 22:39    [W:0.167 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site