lkml.org 
[lkml]   [2020]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] dt-bindings: iio: amplifiers: Add docs for HMC425A Step Attenuator
Date
From: Michael Hennerich <michael.hennerich@analog.com>

Document support for Analog Devices MC425A Step Attenuator.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
---
.../bindings/iio/amplifiers/adi,hmc425a.yaml | 55 +++++++++++++++++++
1 file changed, 55 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml

diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
new file mode 100644
index 000000000000..6f4a292395e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/amplifiers/adi,hmc425a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HMC425A 6-bit Digital Step Attenuator
+
+maintainers:
+- Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+ Digital Step Attenuator IIO device with gpio interface.
+ HMC425A 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz
+ https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf
+
+properties:
+compatible:
+ enum:
+ - adi,hmc425a
+
+vcc-supply:
+ description:
+ digital voltage regulator (see regulator/regulator.txt)
+ maxItems: 1
+
+ctrl-gpios:
+ description:
+ Must contain an array of 6 GPIO specifiers, referring to the GPIO pins
+ connected to the control pins V1-V6.
+ maxItems: 6
+
+required:
+- compatible
+- ctrl-gpios
+
+examples:
+- |
+ #include <dt-bindings/gpio/gpio.h>
+
+ &gpio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio_hmc425a: hmc425a {
+ compatible = "adi,hmc425a";
+ ctrl-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>,
+ <&gpio 39 GPIO_ACTIVE_HIGH>,
+ <&gpio 38 GPIO_ACTIVE_HIGH>,
+ <&gpio 37 GPIO_ACTIVE_HIGH>,
+ <&gpio 36 GPIO_ACTIVE_HIGH>,
+ <&gpio 35 GPIO_ACTIVE_HIGH>;
+
+ vcc-supply = <&foo>;
+ };
+ }
--
2.17.1
\
 
 \ /
  Last update: 2020-01-13 15:16    [W:0.132 / U:5.732 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site