lkml.org 
[lkml]   [2020]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 2/8] i2c: tegra: Properly disable runtime PM on driver's probe error
Date
One of the recent Tegra I2C commits made a change that resumes runtime PM
during driver's probe, but it missed to put the RPM in a case of error.
Note that it's not correct to use pm_runtime_status_suspended because it
breaks RPM refcounting.

Fixes: 8ebf15e9c869 ("i2c: tegra: Move suspend handling to NOIRQ phase")
Cc: <stable@vger.kernel.org> # v5.4+
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
drivers/i2c/busses/i2c-tegra.c | 29 +++++++++++++++++++----------
1 file changed, 19 insertions(+), 10 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 79d19f6ce94e..61339c665ebd 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -1608,14 +1608,18 @@ static int tegra_i2c_probe(struct platform_device *pdev)
}

pm_runtime_enable(&pdev->dev);
- if (!pm_runtime_enabled(&pdev->dev))
+ if (!pm_runtime_enabled(&pdev->dev)) {
ret = tegra_i2c_runtime_resume(&pdev->dev);
- else
+ if (ret < 0) {
+ dev_err(&pdev->dev, "runtime resume failed\n");
+ goto unprepare_div_clk;
+ }
+ } else {
ret = pm_runtime_get_sync(i2c_dev->dev);
-
- if (ret < 0) {
- dev_err(&pdev->dev, "runtime resume failed\n");
- goto unprepare_div_clk;
+ if (ret < 0) {
+ dev_err(&pdev->dev, "runtime resume failed\n");
+ goto disable_rpm;
+ }
}

if (i2c_dev->is_multimaster_mode) {
@@ -1623,7 +1627,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
if (ret < 0) {
dev_err(i2c_dev->dev, "div_clk enable failed %d\n",
ret);
- goto disable_rpm;
+ goto put_rpm;
}
}

@@ -1671,11 +1675,16 @@ static int tegra_i2c_probe(struct platform_device *pdev)
if (i2c_dev->is_multimaster_mode)
clk_disable(i2c_dev->div_clk);

-disable_rpm:
- pm_runtime_disable(&pdev->dev);
- if (!pm_runtime_status_suspended(&pdev->dev))
+put_rpm:
+ if (pm_runtime_enabled(&pdev->dev))
+ pm_runtime_put_sync(&pdev->dev);
+ else
tegra_i2c_runtime_suspend(&pdev->dev);

+disable_rpm:
+ if (pm_runtime_enabled(&pdev->dev))
+ pm_runtime_disable(&pdev->dev);
+
unprepare_div_clk:
clk_unprepare(i2c_dev->div_clk);

--
2.24.0
\
 
 \ /
  Last update: 2020-01-14 02:37    [W:1.885 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site