lkml.org 
[lkml]   [2020]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/8] NVIDIA Tegra I2C driver fixes and improvements
Date
Hello,

This patchset adds support for atomic transfers which are required for
shutting down machine properly. Secondly, a (not)suspending I2C and some
other things are fixed/improved by this small series as well. Please review
and apply, thanks in advance!

Changelog:

v4: Removed the "clk: tegra: Fix double-free in tegra_clk_init()" patch
from this series, which was added by accident in v3.

Added Thierry's tested-by to the patches.

v3: The "Prevent interrupt triggering after transfer timeout" and "Support
atomic transfers" patches got extra very minor improvements. The
completion now is passed directly to tegra_i2c_poll_completion_timeout(),
for consistency.

Added two new patches that firm up DMA transfer handling:

i2c: tegra: Always terminate DMA transfer
i2c: tegra: Check DMA completion status in addition to left time

v2: The series is renamed from "Tegra I2C: Support atomic transfers and
correct suspend/resume" to "NVIDIA Tegra I2C driver fixes and
improvements" because it now contains some more various changes.

New patches in v2:

i2c: tegra: Correct unwinding order on driver's probe error
i2c: tegra: Prevent interrupt triggering after transfer timeout
i2c: tegra: Use relaxed versions of readl/writel

The "Rename I2C_PIO_MODE_MAX_LEN to I2C_PIO_MODE_PREFERRED_LEN" got an
improved wording for the code's comment to I2C_PIO_MODE_PREFERRED_LEN.

The "Support atomic transfers" also got some very minor tuning, like
s/in_interrupt()/i2c_dev->is_curr_atomic_xfer/ in dvc_writel() that was
missed in v1.

v1: The "i2c: tegra: Support atomic transfers" previously was sent out as
a separate patch, but later I spotted that suspend/resume doesn't
work properly. The "i2c: tegra: Fix suspending in active runtime PM
state" patch depends on the atomic patch because there is a need to
active IRQ-safe mode for the runtime PM by both patches.

I fixed a missed doc-comment of the newly added "is_curr_atomic_xfer"
structure field and added additional comment that explains why IRQ needs
to be disabled for the atomic transfer in the "Support atomic transfers"
patch.

Lastly, I added a minor "i2c: tegra: Rename .." patch that helps to
follow driver's code.

Dmitry Osipenko (8):
i2c: tegra: Fix suspending in active runtime PM state
i2c: tegra: Properly disable runtime PM on driver's probe error
i2c: tegra: Prevent interrupt triggering after transfer timeout
i2c: tegra: Support atomic transfers
i2c: tegra: Rename I2C_PIO_MODE_MAX_LEN to I2C_PIO_MODE_PREFERRED_LEN
i2c: tegra: Use relaxed versions of readl/writel
i2c: tegra: Always terminate DMA transfer
i2c: tegra: Check DMA completion status in addition to left time

drivers/i2c/busses/i2c-tegra.c | 216 ++++++++++++++++++++++-----------
1 file changed, 144 insertions(+), 72 deletions(-)

--
2.24.0

\
 
 \ /
  Last update: 2020-01-12 18:18    [W:0.106 / U:28.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site