lkml.org 
[lkml]   [2020]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] hwmon: Driver for temperature sensors on SATA drives
From
Date
On 1/12/20 4:07 AM, Linus Walleij wrote:
> On Sun, Jan 12, 2020 at 1:03 PM Gabriel C <nix.or.die@gmail.com> wrote:
>> Am So., 12. Jan. 2020 um 12:22 Uhr schrieb Linus Walleij
>> <linus.walleij@linaro.org>:
>>>
>>> On Sun, Jan 12, 2020 at 12:18 PM Gabriel C <nix.or.die@gmail.com> wrote:
>>>
>>>> What I've noticed however is the nvme temperature low/high values on
>>>> the Sensors X are strange here.
>>> (...)
>>>> Sensor 1: +27.9°C (low = -273.1°C, high = +65261.8°C)
>>>> Sensor 2: +29.9°C (low = -273.1°C, high = +65261.8°C)
>>> (...)
>>>> Sensor 1: +23.9°C (low = -273.1°C, high = +65261.8°C)
>>>> Sensor 2: +25.9°C (low = -273.1°C, high = +65261.8°C)
>>>
>>> That doesn't look strange to me. It seems like reasonable defaults
>>> from the firmware if either it doesn't really log the min/max temperatures
>>> or hasn't been through a cycle of updating these yet. Just set both
>>> to absolute min/max temperatures possible.
>>
>> Ok I'll check that.
>>
>> Do you mean by setting the temperatures to use a lmsensors config?
>> Or is there a way to set these with a nvme command?
>
> Not that I know of.
>
> The min/max are the minumum and maximum temperatures the
> device has experienced during this power-on cycle.
>

No, that would be lowest/highest. The above are (or should be) per-sensor
setpoints. The default for those is typically the absolute minimum /
maximum of the supported range.

Some SATA drives report the lowest/highest temperatures experienced
since power cycle, like here.

drivetemp-scsi-5-0
Adapter: SCSI adapter
temp1: +23.0°C (low = +0.0°C, high = +60.0°C)
(crit low = -41.0°C, crit = +85.0°C)
(lowest = +20.0°C, highest = +31.0°C)

Guenter

\
 
 \ /
  Last update: 2020-01-12 14:09    [W:0.043 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site