lkml.org 
[lkml]   [2020]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] hwmon: Driver for temperature sensors on SATA drives
Am So., 12. Jan. 2020 um 12:22 Uhr schrieb Linus Walleij
<linus.walleij@linaro.org>:
>
> On Sun, Jan 12, 2020 at 12:18 PM Gabriel C <nix.or.die@gmail.com> wrote:
>
> > What I've noticed however is the nvme temperature low/high values on
> > the Sensors X are strange here.
> (...)
> > Sensor 1: +27.9°C (low = -273.1°C, high = +65261.8°C)
> > Sensor 2: +29.9°C (low = -273.1°C, high = +65261.8°C)
> (...)
> > Sensor 1: +23.9°C (low = -273.1°C, high = +65261.8°C)
> > Sensor 2: +25.9°C (low = -273.1°C, high = +65261.8°C)
>
> That doesn't look strange to me. It seems like reasonable defaults
> from the firmware if either it doesn't really log the min/max temperatures
> or hasn't been through a cycle of updating these yet. Just set both
> to absolute min/max temperatures possible.

Ok I'll check that.

Do you mean by setting the temperatures to use a lmsensors config?
Or is there a way to set these with a nvme command?

\
 
 \ /
  Last update: 2020-01-12 13:04    [W:0.069 / U:10.936 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site