lkml.org 
[lkml]   [2020]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] HID: logitech-hidpp: add support for the Powerplay mat/receiver
Date
The Logitech G Powerplay has a lightspeed receiver with a static HID++
device with ID 7 attached to it to. It is used to configure the led on
the mat. For this reason I increased the max number of devices.

I also marked all lightspeed devices as HID++ compatible. As the
internal powerplay device does not have REPORT_TYPE_KEYBOARD or
REPORT_TYPE_KEYBOARD it was not being marked as HID++ compatible in
logi_hidpp_dev_conn_notif_equad.

Signed-off-by: Filipe Laíns <lains@archlinux.org>
---
drivers/hid/hid-logitech-dj.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index bb50d6e7745b..732380b55b15 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -16,11 +16,11 @@
#include <asm/unaligned.h>
#include "hid-ids.h"

-#define DJ_MAX_PAIRED_DEVICES 6
+#define DJ_MAX_PAIRED_DEVICES 7
#define DJ_MAX_NUMBER_NOTIFS 8
#define DJ_RECEIVER_INDEX 0
#define DJ_DEVICE_INDEX_MIN 1
-#define DJ_DEVICE_INDEX_MAX 6
+#define DJ_DEVICE_INDEX_MAX 7

#define DJREPORT_SHORT_LENGTH 15
#define DJREPORT_LONG_LENGTH 32
@@ -971,7 +971,7 @@ static void logi_hidpp_recv_queue_notif(struct hid_device *hdev,
case 0x0c:
device_type = "eQUAD Lightspeed 1";
logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem);
- workitem.reports_supported |= STD_KEYBOARD;
+ workitem.reports_supported |= STD_KEYBOARD | HIDPP;
break;
case 0x0d:
device_type = "eQUAD Lightspeed 1_1";
@@ -1850,6 +1850,10 @@ static const struct hid_device_id logi_dj_receivers[] = {
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1),
.driver_data = recvr_type_gaming_hidpp},
+ { /* Logitech powerplay mat/receiver (0xc539) */
+ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
+ 0xc53a),
+ .driver_data = recvr_type_gaming_hidpp},
{ /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER),
.driver_data = recvr_type_27mhz},
--
2.24.1
\
 
 \ /
  Last update: 2020-01-12 21:51    [W:0.058 / U:3.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site