lkml.org 
[lkml]   [2020]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 143/165] net: stmmac: dwmac-sunxi: Allow all RGMII modes
Date
From: Chen-Yu Tsai <wens@csie.org>

[ Upstream commit 52cc73e5404c7ba0cbfc50cb4c265108c84b3d5a ]

Allow all the RGMII modes to be used. This would allow us to represent
the hardware better in the device tree with RGMII_ID where in most
cases the PHY's internal delay for both RX and TX are used.

Fixes: af0bd4e9ba80 ("net: stmmac: sunxi platform extensions for GMAC in Allwinner A20 SoC's")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
@@ -44,7 +44,7 @@ static int sun7i_gmac_init(struct platfo
* rate, which then uses the auto-reparenting feature of the
* clock driver, and enabling/disabling the clock.
*/
- if (gmac->interface == PHY_INTERFACE_MODE_RGMII) {
+ if (phy_interface_mode_is_rgmii(gmac->interface)) {
clk_set_rate(gmac->tx_clk, SUN7I_GMAC_GMII_RGMII_RATE);
clk_prepare_enable(gmac->tx_clk);
gmac->clk_enabled = 1;

\
 
 \ /
  Last update: 2020-01-11 11:33    [W:0.446 / U:0.972 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site