lkml.org 
[lkml]   [2020]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 8/9] mmc: mmci: sdmmc: add voltage switch functions
Date
To prepare the voltage switch procedure, the VSWITCHEN bit must be
set before sending the cmd11.
To confirm completion of voltage switch, the VSWEND flag must be
checked.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
drivers/mmc/host/mmci.h | 4 +++
drivers/mmc/host/mmci_stm32_sdmmc.c | 40 ++++++++++++++++++++++++++++-
2 files changed, 43 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index c04a144259a2..3634f98ad2d8 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -165,6 +165,7 @@
/* Extended status bits for the STM32 variants */
#define MCI_STM32_BUSYD0 BIT(20)
#define MCI_STM32_BUSYD0END BIT(21)
+#define MCI_STM32_VSWEND BIT(25)

#define MMCICLEAR 0x038
#define MCI_CMDCRCFAILCLR (1 << 0)
@@ -182,6 +183,9 @@
#define MCI_ST_SDIOITC (1 << 22)
#define MCI_ST_CEATAENDC (1 << 23)
#define MCI_ST_BUSYENDC (1 << 24)
+/* Extended clear bits for the STM32 variants */
+#define MCI_STM32_VSWENDC BIT(25)
+#define MCI_STM32_CKSTOPC BIT(26)

#define MMCIMASK0 0x03c
#define MCI_CMDCRCFAILMASK (1 << 0)
diff --git a/drivers/mmc/host/mmci_stm32_sdmmc.c b/drivers/mmc/host/mmci_stm32_sdmmc.c
index 10059fa19f4a..9f43cf947c5f 100644
--- a/drivers/mmc/host/mmci_stm32_sdmmc.c
+++ b/drivers/mmc/host/mmci_stm32_sdmmc.c
@@ -263,7 +263,9 @@ static void mmci_sdmmc_set_pwrreg(struct mmci_host *host, unsigned int pwr)
struct mmc_ios ios = host->mmc->ios;
struct sdmmc_dlyb *dlyb = host->variant_priv;

- pwr = host->pwr_reg_add;
+ /* adds OF options and preserves voltage switch bits */
+ pwr = host->pwr_reg_add |
+ (host->pwr_reg & (MCI_STM32_VSWITCHEN | MCI_STM32_VSWITCH));

sdmmc_dlyb_input_ck(dlyb);

@@ -454,6 +456,40 @@ static int sdmmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
return sdmmc_dlyb_phase_tuning(host, opcode);
}

+static void sdmmc_prep_vswitch(struct mmci_host *host)
+{
+ /* clear the voltage switch completion flag */
+ writel_relaxed(MCI_STM32_VSWENDC, host->base + MMCICLEAR);
+ /* enable Voltage switch procedure */
+ mmci_write_pwrreg(host, host->pwr_reg | MCI_STM32_VSWITCHEN);
+}
+
+static int sdmmc_vswitch(struct mmci_host *host, struct mmc_ios *ios)
+{
+ unsigned long flags;
+ u32 status;
+ int ret = 0;
+
+ if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
+ spin_lock_irqsave(&host->lock, flags);
+ mmci_write_pwrreg(host, host->pwr_reg | MCI_STM32_VSWITCH);
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ /* wait voltage switch completion while 10ms */
+ ret = readl_relaxed_poll_timeout(host->base + MMCISTATUS,
+ status,
+ (status & MCI_STM32_VSWEND),
+ 10, 10000);
+
+ writel_relaxed(MCI_STM32_VSWENDC | MCI_STM32_CKSTOPC,
+ host->base + MMCICLEAR);
+ mmci_write_pwrreg(host, host->pwr_reg &
+ ~(MCI_STM32_VSWITCHEN | MCI_STM32_VSWITCH));
+ }
+
+ return ret;
+}
+
static struct mmci_host_ops sdmmc_variant_ops = {
.validate_data = sdmmc_idma_validate_data,
.prep_data = sdmmc_idma_prep_data,
@@ -465,6 +501,8 @@ static struct mmci_host_ops sdmmc_variant_ops = {
.set_clkreg = mmci_sdmmc_set_clkreg,
.set_pwrreg = mmci_sdmmc_set_pwrreg,
.busy_complete = sdmmc_busy_complete,
+ .prep_volt_switch = sdmmc_prep_vswitch,
+ .volt_switch = sdmmc_vswitch,
};

void sdmmc_variant_init(struct mmci_host *host)
--
2.17.1
\
 
 \ /
  Last update: 2020-01-10 14:50    [W:0.158 / U:5.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site