lkml.org 
[lkml]   [2020]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] dt-bindings: clock: Refine i.MX8MN clock binding
Date
Refine i.MX8MN clock binding by removing useless content and
updating the example, it makes all i.MX8M SoCs' clock binding
aligned.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
.../devicetree/bindings/clock/imx8mn-clock.yaml | 48 +---------------------
1 file changed, 2 insertions(+), 46 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
index 622f365..da2103d 100644
--- a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
@@ -40,7 +40,7 @@ properties:

'#clock-cells':
const: 1
- description: |
+ description:
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mn-clock.h
for the full list of i.MX8M Nano clock IDs.
@@ -57,7 +57,7 @@ examples:
- |
clk: clock-controller@30380000 {
compatible = "fsl,imx8mn-ccm";
- reg = <0x0 0x30380000 0x0 0x10000>;
+ reg = <0x30380000 0x10000>;
#clock-cells = <1>;
clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>,
<&clk_ext2>, <&clk_ext3>, <&clk_ext4>;
@@ -65,48 +65,4 @@ examples:
"clk_ext2", "clk_ext3", "clk_ext4";
};

- # Required external clocks for Clock Control Module node:
- - |
- osc_32k: clock-osc-32k {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "osc_32k";
- };
-
- osc_24m: clock-osc-24m {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "osc_24m";
- };
-
- clk_ext1: clock-ext1 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <133000000>;
- clock-output-names = "clk_ext1";
- };
-
- clk_ext2: clock-ext2 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <133000000>;
- clock-output-names = "clk_ext2";
- };
-
- clk_ext3: clock-ext3 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <133000000>;
- clock-output-names = "clk_ext3";
- };
-
- clk_ext4: clock-ext4 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency= <133000000>;
- clock-output-names = "clk_ext4";
- };
-
...
--
2.7.4
\
 
 \ /
  Last update: 2020-01-10 09:00    [W:0.068 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site