lkml.org 
[lkml]   [2019]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC v2 1/3] cpufreq: ti-cpufreq: add support for omap34xx and omap36xx
From
Date
Hi,

> Am 06.09.2019 um 05:01 schrieb Viresh Kumar <viresh.kumar@linaro.org>:
>
> On 05-09-19, 07:32, Tony Lindgren wrote:
>> * H. Nikolaus Schaller <hns@goldelico.com> [190904 08:54]:
>>> This adds code and tables to read the silicon revision and
>>> eFuse (speed binned / 720 MHz grade) bits for selecting
>>> opp-v2 table entries.
>>>
>>> Since these bits are not always part of the syscon register
>>> range (like for am33xx, am43, dra7), we add code to directly
>>> read the register values using ioremap() if syscon access fails.
>>
>> This is nice :) Seems to work for me based on a quick test
>> on at least omap36xx.
>>
>> Looks like n900 produces the following though:
>>
>> core: _opp_supported_by_regulators: OPP minuV: 1270000 maxuV: 1270000, not supported by regulator
>> cpu cpu0: _opp_add: OPP not supported by regulators (550000000)
>
> That's a DT thing I believe where the voltage doesn't fit what the
> regulator can support.

I can confirm this on BeagleBoard C2:

root@gta04:~# dmesg|fgrep -i opp
[ 2.347442] core: _opp_supported_by_regulators: OPP minuV: 1270000 maxuV: 1270000, not supported by regulator
[ 2.359222] cpu cpu0: _opp_add: OPP not supported by regulators (550000000)
[ 2.580993] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
root@gta04:~#

>
>> But presumably that can be further patched.

Well, the opp-v1 table also has this voltage point:

/* OMAP343x/OMAP35xx variants OPP1-5 */
operating-points = <
/* kHz uV */
125000 975000
250000 1075000
500000 1200000
550000 1270000
600000 1350000
>;


This is OPP4 which is recommended by OMAP3530 data sheet to be 1.27V +/- 5%

Data sheet of tps65950 says

• VDD1: 1.2-A, buck DC/DC converter (VOUT = 0.6 V to 1.45 V, in steps of 12.5 mV)

This means 1270 mV is not a "step" and rejected by the twl4030 driver.
Maybe nobody did notice yet because the opp-v1 drivers did not warn...

The closest value to 1.27V is 0.6V + 54 * 12.5mV is 1.275V

So let's also change the OPP4 to 1275000 uV in the opp-v2 table.

BR and thanks,
Nikolaus
\
 
 \ /
  Last update: 2019-09-06 22:47    [W:0.089 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site