lkml.org 
[lkml]   [2019]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 4/5] gpios: Use ngpio property from device tree if available
On Fri, 6 Sep 2019 at 06:27, Rashmica Gupta <rashmica.g@gmail.com> wrote:
>
> Use the ngpio property from the device tree if it exists. If it doesn't
> then fallback to the hardcoded value in the config.
>
> This is in preparation for adding ast2600 support. The ast2600 SoC has
> two GPIO controllers and so requires two instances of the GPIO driver.
> We use the ngpio property to different between them as they have
> different numbers of GPIOs.
>
> Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>

Reviewed-by: Joel Stanley <joel@jms.id.au>

> ---
> drivers/gpio/gpio-aspeed.c | 18 +++++++++++-------
> 1 file changed, 11 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
> index 16c6eaf70857..c3d5ecba343b 100644
> --- a/drivers/gpio/gpio-aspeed.c
> +++ b/drivers/gpio/gpio-aspeed.c
> @@ -694,7 +694,7 @@ static void set_irq_valid_mask(struct aspeed_gpio *gpio)
> for_each_clear_bit(offset, &input, 32) {
> unsigned int i = props->bank * 32 + offset;
>
> - if (i >= gpio->config->nr_gpios)
> + if (i >= gpio->chip.ngpio)
> break;
>
> clear_bit(i, gpio->chip.irq.valid_mask);
> @@ -1007,10 +1007,10 @@ int aspeed_gpio_copro_grab_gpio(struct gpio_desc *desc,
> unsigned long flags;
>
> if (!gpio->cf_copro_bankmap)
> - gpio->cf_copro_bankmap = kzalloc(gpio->config->nr_gpios >> 3, GFP_KERNEL);
> + gpio->cf_copro_bankmap = kzalloc(gpio->chip.ngpio >> 3, GFP_KERNEL);
> if (!gpio->cf_copro_bankmap)
> return -ENOMEM;
> - if (offset < 0 || offset > gpio->config->nr_gpios)
> + if (offset < 0 || offset > gpio->chip.ngpio)
> return -EINVAL;
> bindex = offset >> 3;
>
> @@ -1055,7 +1055,7 @@ int aspeed_gpio_copro_release_gpio(struct gpio_desc *desc)
> if (!gpio->cf_copro_bankmap)
> return -ENXIO;
>
> - if (offset < 0 || offset > gpio->config->nr_gpios)
> + if (offset < 0 || offset > gpio->chip.ngpio)
> return -EINVAL;
> bindex = offset >> 3;
>
> @@ -1119,7 +1119,8 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev)
> {
> const struct of_device_id *gpio_id;
> struct aspeed_gpio *gpio;
> - int rc, i, banks;
> + int rc, i, banks, err;
> + u32 ngpio;
>
> gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
> if (!gpio)
> @@ -1145,7 +1146,10 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev)
> gpio->config = gpio_id->data;
>
> gpio->chip.parent = &pdev->dev;
> - gpio->chip.ngpio = gpio->config->nr_gpios;
> + err = of_property_read_u32(pdev->dev.of_node, "ngpios", &ngpio);
> + gpio->chip.ngpio = (u16) ngpio;
> + if (err)
> + gpio->chip.ngpio = gpio->config->nr_gpios;
> gpio->chip.direction_input = aspeed_gpio_dir_in;
> gpio->chip.direction_output = aspeed_gpio_dir_out;
> gpio->chip.get_direction = aspeed_gpio_get_direction;
> @@ -1158,7 +1162,7 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev)
> gpio->chip.base = -1;
>
> /* Allocate a cache of the output registers */
> - banks = DIV_ROUND_UP(gpio->config->nr_gpios, 32);
> + banks = DIV_ROUND_UP(gpio->chip.ngpio, 32);
> gpio->dcache = devm_kcalloc(&pdev->dev,
> banks, sizeof(u32), GFP_KERNEL);
> if (!gpio->dcache)
> --
> 2.20.1
>

\
 
 \ /
  Last update: 2019-09-06 21:48    [W:0.170 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site