lkml.org 
[lkml]   [2019]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 1/2] dt-bindings: PCI: intel: Add YAML schemas for the PCIe RC controller
On Fri, Sep 6, 2019 at 5:22 AM Chuan Hua, Lei
<chuanhua.lei@linux.intel.com> wrote:
[...]
> >> +examples:
> >> + - |
> >> + pcie10:pcie@d0e00000 {
> >> + compatible = "intel,lgm-pcie";
> >> + device_type = "pci";
> >> + #address-cells = <3>;
> >> + #size-cells = <2>;
> >> + reg = <
> >> + 0xd0e00000 0x1000
> >> + 0xd2000000 0x800000
> >> + 0xd0a41000 0x1000
> >> + >;
> >> + reg-names = "dbi", "config", "app";
> >> + linux,pci-domain = <0>;
> >> + max-link-speed = <4>;
> >> + bus-range = <0x00 0x08>;
> >> + interrupt-parent = <&ioapic1>;
> >> + interrupts = <67 1>;
> >> + #interrupt-cells = <1>;
> >> + interrupt-map-mask = <0 0 0 0x7>;
> >> + interrupt-map = <0 0 0 1 &ioapic1 27 1>,
> >> + <0 0 0 2 &ioapic1 28 1>,
> >> + <0 0 0 3 &ioapic1 29 1>,
> >> + <0 0 0 4 &ioapic1 30 1>;
> > is the "1" in the interrupts and interrupt-map properties IRQ_TYPE_EDGE_RISING?
> > you can use these macros in this example as well, see
> > Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml for
> > example
>
> No. 1 here means index from arch/x86/devicetree.c
>
> static struct of_ioapic_type of_ioapic_type[] =
> {
> {
> .out_type = IRQ_TYPE_EDGE_RISING,
> .trigger = IOAPIC_EDGE,
> .polarity = 1,
> },
> {
> .out_type = IRQ_TYPE_LEVEL_LOW,
> .trigger = IOAPIC_LEVEL,
> .polarity = 0,
> },
> {
> .out_type = IRQ_TYPE_LEVEL_HIGH,
> .trigger = IOAPIC_LEVEL,
> .polarity = 1,
> },
> {
> .out_type = IRQ_TYPE_EDGE_FALLING,
> .trigger = IOAPIC_EDGE,
> .polarity = 0,
> },
> };
>
> static int dt_irqdomain_alloc(struct irq_domain *domain, unsigned int virq,
> unsigned int nr_irqs, void *arg)
> {
> struct irq_fwspec *fwspec = (struct irq_fwspec *)arg;
> struct of_ioapic_type *it;
> struct irq_alloc_info tmp;
> int type_index;
>
> if (WARN_ON(fwspec->param_count < 2))
> return -EINVAL;
>
> type_index = fwspec->param[1]; // index.
> if (type_index >= ARRAY_SIZE(of_ioapic_type))
> return -EINVAL;
>
> I would not see this definition is user-friendly. But it is how x86
> handles at the moment.
thank you for explaining this - I had no idea x86 is different from
all other platforms I know
the only upstream x86 .dts I could find
(arch/x86/platform/ce4100/falconfalls.dts) also uses the magic x86
numbers
so I'm fine with this until someone else knows a better solution


Martin

\
 
 \ /
  Last update: 2019-09-06 19:17    [W:0.169 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site