lkml.org 
[lkml]   [2019]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/1] PCI: iproc: Invalidate PAXB address mapping before programming it
Hi Andrew,

Thanks for the review. Please see my response inline:

On Fri, Sep 6, 2019 at 2:08 PM Andrew Murray <andrew.murray@arm.com> wrote:
>
> On Fri, Sep 06, 2019 at 09:28:13AM +0530, Abhishek Shah wrote:
> > Invalidate PAXB inbound/outbound address mapping each time before
> > programming it. This is helpful for the cases where we need to
> > reprogram inbound/outbound address mapping without resetting PAXB.
> > kexec kernel is one such example.
>
> Why is this approach better than resetting the PAXB (I assume that's
> the PCI controller IP)? Wouldn't resetting the PAXB address this issue,
> and ensure that no other configuration is left behind?
>
We normally reset PAXB in the firmware(ATF). But for cases like kexec
kernel boot,
we do not execute any firmware code and directly boot into kernel.

We could have done PAXB reset in the driver itself as you have suggested here.
But note that this detail could vary for each SoC, because these
registers are not part
of PAXB register space itself, rather exists in a register space responsible for
controlling power to various wrappers in PCIe IP. Normally, this kind
of SoC specific
details are handled in firmware itself, we don't bring them to driver level.

> Or is this related to earlier boot stages loading firmware for the emulated
> downstream endpoints (ep_is_internal)?
>
> Finally, in the case where ep_is_internal do you need to disable anything
> prior to invalidating the mappings?
>
No, ep_is_internal is indicator for PAXC IP. It does not have
mappings as in PAXB.


Regards,
Abhishek
> >
> > Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
> > Reviewed-by: Ray Jui <ray.jui@broadcom.com>
> > Reviewed-by: Vikram Mysore Prakash <vikram.prakash@broadcom.com>
> > ---
> > drivers/pci/controller/pcie-iproc.c | 28 ++++++++++++++++++++++++++++
> > 1 file changed, 28 insertions(+)
> >
> > diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c
> > index e3ca46497470..99a9521ba7ab 100644
> > --- a/drivers/pci/controller/pcie-iproc.c
> > +++ b/drivers/pci/controller/pcie-iproc.c
> > @@ -1245,6 +1245,32 @@ static int iproc_pcie_map_dma_ranges(struct iproc_pcie *pcie)
> > return ret;
> > }
> >
> > +static void iproc_pcie_invalidate_mapping(struct iproc_pcie *pcie)
> > +{
> > + struct iproc_pcie_ib *ib = &pcie->ib;
> > + struct iproc_pcie_ob *ob = &pcie->ob;
> > + int idx;
> > +
> > + if (pcie->ep_is_internal)
> > + return;
> > +
> > + if (pcie->need_ob_cfg) {
> > + /* iterate through all OARR mapping regions */
> > + for (idx = ob->nr_windows - 1; idx >= 0; idx--) {
> > + iproc_pcie_write_reg(pcie,
> > + MAP_REG(IPROC_PCIE_OARR0, idx), 0);
> > + }
> > + }
> > +
> > + if (pcie->need_ib_cfg) {
> > + /* iterate through all IARR mapping regions */
> > + for (idx = 0; idx < ib->nr_regions; idx++) {
> > + iproc_pcie_write_reg(pcie,
> > + MAP_REG(IPROC_PCIE_IARR0, idx), 0);
> > + }
> > + }
> > +}
> > +
> > static int iproce_pcie_get_msi(struct iproc_pcie *pcie,
> > struct device_node *msi_node,
> > u64 *msi_addr)
> > @@ -1517,6 +1543,8 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
> > iproc_pcie_perst_ctrl(pcie, true);
> > iproc_pcie_perst_ctrl(pcie, false);
> >
> > + iproc_pcie_invalidate_mapping(pcie);
> > +
> > if (pcie->need_ob_cfg) {
> > ret = iproc_pcie_map_ranges(pcie, res);
> > if (ret) {
>
> The code changes look good to me.
>
> Thanks,
>
> Andrew Murray
>
> > --
> > 2.17.1
> >

\
 
 \ /
  Last update: 2019-09-06 11:26    [W:0.108 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site