lkml.org 
[lkml]   [2019]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH -next 7/8] dmaengine: xilinx_dma: Check for both idle and halted state in axidma stop_transfer
Date
From: Nicholas Graumann <nick.graumann@gmail.com>

When polling for a stopped transfer in AXI DMA mode, in some cases the
status of the channel may indicate IDLE instead of HALTED if the
channel was reset due to an error.

Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
---
drivers/dma/xilinx/xilinx_dma.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index b5dd62a..0896e07 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -1092,8 +1092,9 @@ static int xilinx_dma_stop_transfer(struct xilinx_dma_chan *chan)

/* Wait for the hardware to halt */
return xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
- val & XILINX_DMA_DMASR_HALTED, 0,
- XILINX_DMA_LOOP_COUNT);
+ val | (XILINX_DMA_DMASR_IDLE |
+ XILINX_DMA_DMASR_HALTED),
+ 0, XILINX_DMA_LOOP_COUNT);
}

/**
--
2.7.4
\
 
 \ /
  Last update: 2019-09-05 18:44    [W:0.144 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site