lkml.org 
[lkml]   [2019]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] arm64: dts: mt8183: Add node for the Mali GPU
On Thu, Sep 5, 2019 at 10:49 AM Nicolas Boichat <drinkcat@chromium.org> wrote:
>
> Thanks for the quick review!
>
> On Thu, Sep 5, 2019 at 5:09 PM Rob Herring <robh+dt@kernel.org> wrote:
> >
> > On Thu, Sep 5, 2019 at 9:16 AM Nicolas Boichat <drinkcat@chromium.org> wrote:
> > >
> > > Add a basic GPU node and opp table for mt8183.
> > >
> > > The binding we use with out-of-tree Mali drivers includes more
> > > clocks, I assume this would be required eventually if we have an
> > > in-tree driver:
> >
> > We have an in-tree driver...
>
> Right but AFAICT it does not support Bifrost GPU (yet?).

It's mostly the mesa userspace side that's missing. The kernel driver
needs the compatible string and page table support[1]. The former
should be enough to access the registers which is typically enough to
sort out an platform specific clock, reset, power issues.

> > > clocks =
> > > <&topckgen CLK_TOP_MFGPLL_CK>,
> > > <&topckgen CLK_TOP_MUX_MFG>,
> > > <&clk26m>,
> > > <&mfgcfg CLK_MFG_BG3D>;
> > > clock-names =
> > > "clk_main_parent",
> > > "clk_mux",
> > > "clk_sub_parent",
> > > "subsys_mfg_cg";
>
> Do you think we should add those to the binding document? May not be
> easy to match what the amlogic binding does (I'm not sure to
> understand the details of this device, but I can dig further/ask).

I somewhat expect this needs more investigation. I'm doubtful that
there's a 26MHz clock going to Mali. Ideally, the clocks are what are
actually connected to the h/w, not just a list of all the clocks
needed on some platform because we fail to manage them elsewhere (like
an interconnect driver). Otherwise we end up with a different list for
every platform.

> > > Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
> > >
> > > ---
> > > Upstreaming what matches existing bindings from our Chromium OS tree:
> > > https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-4.19/arch/arm64/boot/dts/mediatek/mt8183.dtsi#1348
> > >
> > > The evb part of this change depends on this patch to add PMIC dtsi:
> > > https://patchwork.kernel.org/patch/10928161/
> > >
> > > arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 7 ++
> > > arch/arm64/boot/dts/mediatek/mt8183.dtsi | 103 ++++++++++++++++++++
> > > 2 files changed, 110 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> > > index 1fb195c683c3d01..200d8e65a6368a1 100644
> > > --- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> > > +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> > > @@ -7,6 +7,7 @@
> > >
> > > /dts-v1/;
> > > #include "mt8183.dtsi"
> > > +#include "mt6358.dtsi"
> > >
> > > / {
> > > model = "MediaTek MT8183 evaluation board";
> > > @@ -30,6 +31,12 @@
> > > status = "okay";
> > > };
> > >
> > > +&gpu {
> > > + supply-names = "mali", "mali_sram";
> > > + mali-supply = <&mt6358_vgpu_reg>;
> > > + mali_sram-supply = <&mt6358_vsram_gpu_reg>;
> >
> > Not documented. Just 'sram-supply' is enough.
>
> Will fix.
>
> > Note that the binding doc queued up for 5.4 has been converted to DT schema.
>
> Yep I see that in linux-next.
>
> >
> > > +};
> > > +
> > > &i2c0 {
> > > pinctrl-names = "default";
> > > pinctrl-0 = <&i2c_pins_0>;
> > > diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > > index 97f84aa9fc6e1c1..8ea548a762ea252 100644
> > > --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > > +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > > @@ -579,6 +579,109 @@
> > > #clock-cells = <1>;
> > > };
> > >
> > > + gpu: mali@13040000 {
> >
> > gpu@...
> >
> > > + compatible = "mediatek,mt8183-mali", "arm,mali-bifrost";
> >
> > You need to add this compatible string too.
>
> Will do.
>
> >
> > > + reg = <0 0x13040000 0 0x4000>;
> > > + interrupts =
> > > + <GIC_SPI 280 IRQ_TYPE_LEVEL_LOW>,
> > > + <GIC_SPI 279 IRQ_TYPE_LEVEL_LOW>,
> > > + <GIC_SPI 278 IRQ_TYPE_LEVEL_LOW>;
> > > + interrupt-names = "job", "mmu", "gpu";
> > > +
> > > + clocks = <&topckgen CLK_TOP_MFGPLL_CK>;
> > > + power-domains =
> > > + <&scpsys MT8183_POWER_DOMAIN_MFG_CORE0>,
> > > + <&scpsys MT8183_POWER_DOMAIN_MFG_CORE1>,
> > > + <&scpsys MT8183_POWER_DOMAIN_MFG_2D>;
> >
> > This needs to be documented too.
>
> I see that Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
> has power-domains in the example both not in the yaml, is that
> expected?

Err, no. Probably some copy-n-paste from utgard.

Rob

[1] https://patchwork.freedesktop.org/patch/304731/

\
 
 \ /
  Last update: 2019-09-05 12:35    [W:0.157 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site