lkml.org 
[lkml]   [2019]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] clk: qcom: gcc-sdm845: Use floor ops for sdcc clks
From
Date


On 9/4/2019 4:17 AM, Stephen Boyd wrote:
> Quoting Taniya Das (2019-09-03 08:52:12)
>> Hi,
>>
>> On 8/31/2019 3:04 AM, Doug Anderson wrote:
>>> Hi,
>>>
>>> On Fri, Aug 30, 2019 at 12:51 PM Stephen Boyd <swboyd@chromium.org> wrote:
>>>>
>>>> Some MMC cards fail to enumerate properly when inserted into an MMC slot
>>>> on sdm845 devices. This is because the clk ops for qcom clks round the
>>>> frequency up to the nearest rate instead of down to the nearest rate.
>>>> For example, the MMC driver requests a frequency of 52MHz from
>>>> clk_set_rate() but the qcom implementation for these clks rounds 52MHz
>>>> up to the next supported frequency of 100MHz. The MMC driver could be
>>>> modified to request clk rate ranges but for now we can fix this in the
>>>> clk driver by changing the rounding policy for this clk to be round down
>>>> instead of round up.
>>>
>>> Since all the MMC rates are expressed as "maximum" clock rates doing
>>> it like you are doing it now seems sane.
>>>
>>>
>>
>> Looks like we need to update/track it for all SDCC clocks for all targets.
>>
>
> Yeah. It would be great if you can send the patches. Otherwise I'll
> throw it on my todo list named 'forever'.
>

Sure Stephen, would send out the patches fixing them.

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.

--

\
 
 \ /
  Last update: 2019-09-05 11:25    [W:0.114 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site