lkml.org 
[lkml]   [2019]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] PCI: Add PCIE ACS quirk for IPROC PAXB
[+cc Alex]

On Tue, Aug 20, 2019 at 10:09:45AM +0530, Srinath Mannam wrote:
> From: Abhinav Ratna <abhinav.ratna@broadcom.com>
>
> IPROC PAXB RC doesn't support ACS capabilities and control registers.
> Add quirk to have separate IOMMU groups for all EPs and functions connected
> to root port, by masking RR/CR/SV/UF bits.
>
> Signed-off-by: Abhinav Ratna <abhinav.ratna@broadcom.com>
> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>

I tentatively applied this to pci/misc with Scott's ack for v5.4.

I tweaked the patch itself to follow the style of similar quirks
(interdiff is below, plus a diff of the commit log). Please make sure
I didn't break it.

I also went out on a limb and reworded the comment to give what I
*think* is the justification for this patch, as opposed to merely a
description of the code. I'm making a lot of assumptions there, so
please confirm that they're correct, or supply alternate justification
if they're not.

> ---
> drivers/pci/quirks.c | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index 0f16acc..f9584c0 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -4466,6 +4466,21 @@ static int pci_quirk_mf_endpoint_acs(struct pci_dev *dev, u16 acs_flags)
> return acs_flags ? 0 : 1;
> }
>
> +static int pcie_quirk_brcm_bridge_acs(struct pci_dev *dev, u16 acs_flags)
> +{
> + /*
> + * IPROC PAXB RC doesn't support ACS capabilities and control registers.
> + * Add quirk to to have separate IOMMU groups for all EPs and functions
> + * connected to root port, by masking RR/CR/SV/UF bits.
> + */
> +
> + u16 flags = (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_SV);
> + int ret = acs_flags & ~flags ? 0 : 1;
> +
> + return ret;
> +}
> +
> +
> static const struct pci_dev_acs_enabled {
> u16 vendor;
> u16 device;
> @@ -4559,6 +4574,7 @@ static const struct pci_dev_acs_enabled {
> { PCI_VENDOR_ID_AMPERE, 0xE00A, pci_quirk_xgene_acs },
> { PCI_VENDOR_ID_AMPERE, 0xE00B, pci_quirk_xgene_acs },
> { PCI_VENDOR_ID_AMPERE, 0xE00C, pci_quirk_xgene_acs },
> + { PCI_VENDOR_ID_BROADCOM, 0xD714, pcie_quirk_brcm_bridge_acs },
> { 0 }
> };

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 77c0330ac922..2edbce35e8c5 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4466,21 +4466,19 @@ static int pci_quirk_mf_endpoint_acs(struct pci_dev *dev, u16 acs_flags)
return acs_flags ? 0 : 1;
}

-static int pcie_quirk_brcm_bridge_acs(struct pci_dev *dev, u16 acs_flags)
+static int pci_quirk_brcm_acs(struct pci_dev *dev, u16 acs_flags)
{
/*
- * IPROC PAXB RC doesn't support ACS capabilities and control registers.
- * Add quirk to to have separate IOMMU groups for all EPs and functions
- * connected to root port, by masking RR/CR/SV/UF bits.
+ * iProc PAXB Root Ports don't advertise an ACS capability, but
+ * they do not allow peer-to-peer transactions between Root Ports.
+ * Allow each Root Port to be in a separate IOMMU group by masking
+ * SV/RR/CR/UF bits.
*/
+ acs_flags &= ~(PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);

- u16 flags = (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_SV);
- int ret = acs_flags & ~flags ? 0 : 1;
-
- return ret;
+ return acs_flags ? 0 : 1;
}

-
static const struct pci_dev_acs_enabled {
u16 vendor;
u16 device;
@@ -4574,7 +4572,7 @@ static const struct pci_dev_acs_enabled {
{ PCI_VENDOR_ID_AMPERE, 0xE00A, pci_quirk_xgene_acs },
{ PCI_VENDOR_ID_AMPERE, 0xE00B, pci_quirk_xgene_acs },
{ PCI_VENDOR_ID_AMPERE, 0xE00C, pci_quirk_xgene_acs },
- { PCI_VENDOR_ID_BROADCOM, 0xD714, pcie_quirk_brcm_bridge_acs },
+ { PCI_VENDOR_ID_BROADCOM, 0xD714, pci_quirk_brcm_acs },
{ 0 }
};



@@ -1,49 +1,49 @@
-commit b50ae502eff0
+commit 46b2c32df7a4
Author: Abhinav Ratna <abhinav.ratna@broadcom.com>
Date: Tue Aug 20 10:09:45 2019 +0530

- PCI: Add PCIE ACS quirk for IPROC PAXB
+ PCI: Add ACS quirk for iProc PAXB

- IPROC PAXB RC doesn't support ACS capabilities and control registers.
- Add quirk to have separate IOMMU groups for all EPs and functions connected
- to root port, by masking RR/CR/SV/UF bits.
+ iProc PAXB Root Ports don't advertise an ACS capability, but they do not
+ allow peer-to-peer transactions between Root Ports. Add an ACS quirk so
+ each Root Port can be in a separate IOMMU group.

+ [bhelgaas: commit log, comment, use common implementation style]
Link: https://lore.kernel.org/r/1566275985-25670-1-git-send-email-srinath.mannam@broadcom.com
Signed-off-by: Abhinav Ratna <abhinav.ratna@broadcom.com>
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
+ Acked-by: Scott Branden <scott.branden@broadcom.com>


\
 
 \ /
  Last update: 2019-09-06 00:27    [W:0.069 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site