lkml.org 
[lkml]   [2019]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/6] soundwire: fix startup sequence for Intel/Cadence
On 13-08-19, 16:32, Pierre-Louis Bossart wrote:
> Multiple changes squashed in single patch to avoid tick-tock effect.
>
> 1. Per the hardware documentation, all changes to MCP_CONFIG,
> MCP_CONTROL, MCP_CMDCTRL and MCP_PHYCTRL need to be validated with a
> self-clearing write to MCP_CONFIG_UPDATE. Add a helper and do the
> update when the CONFIG is changed.
>
> 2. Move interrupt enable after interrupt handler registration
>
> 3. Add a new helper to start the hardware bus reset with maximum duration
> to make sure the Slave(s) correctly detect the reset pattern and to
> ensure electrical conflicts can be resolved.
>
> 4. flush command FIFOs
>
> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
> ---
> drivers/soundwire/cadence_master.c | 84 +++++++++++++++++++++---------
> drivers/soundwire/cadence_master.h | 1 +
> drivers/soundwire/intel.c | 14 ++++-
> 3 files changed, 73 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c
> index 502ed4ec8f07..046622e4b264 100644
> --- a/drivers/soundwire/cadence_master.c
> +++ b/drivers/soundwire/cadence_master.c
> @@ -231,6 +231,22 @@ static int cdns_clear_bit(struct sdw_cdns *cdns, int offset, u32 value)
> return -EAGAIN;
> }
>
> +/*
> + * all changes to the MCP_CONFIG, MCP_CONTROL, MCP_CMDCTRL and MCP_PHYCTRL
> + * need to be confirmed with a write to MCP_CONFIG_UPDATE
> + */
> +static int cdns_update_config(struct sdw_cdns *cdns)
> +{
> + int ret;
> +
> + ret = cdns_clear_bit(cdns, CDNS_MCP_CONFIG_UPDATE,
> + CDNS_MCP_CONFIG_UPDATE_BIT);
> + if (ret < 0)
> + dev_err(cdns->dev, "Config update timedout\n");
> +
> + return ret;
> +}
> +
> /*
> * debugfs
> */
> @@ -752,7 +768,42 @@ EXPORT_SYMBOL(sdw_cdns_thread);
> /*
> * init routines
> */
> -static int _cdns_enable_interrupt(struct sdw_cdns *cdns)
> +
> +/**
> + * sdw_cdns_exit_reset() - Program reset parameters and start bus operations
> + * @cdns: Cadence instance
> + */
> +int sdw_cdns_exit_reset(struct sdw_cdns *cdns)
> +{
> + int ret;
> +
> + /* program maximum length reset to be safe */
> + cdns_updatel(cdns, CDNS_MCP_CONTROL,
> + CDNS_MCP_CONTROL_RST_DELAY,
> + CDNS_MCP_CONTROL_RST_DELAY);
> +
> + /* use hardware generated reset */
> + cdns_updatel(cdns, CDNS_MCP_CONTROL,
> + CDNS_MCP_CONTROL_HW_RST,
> + CDNS_MCP_CONTROL_HW_RST);
> +
> + /* enable bus operations with clock and data */
> + cdns_updatel(cdns, CDNS_MCP_CONFIG,
> + CDNS_MCP_CONFIG_OP,
> + CDNS_MCP_CONFIG_OP_NORMAL);
> +
> + /* commit changes */
> + ret = cdns_update_config(cdns);
> +
> + return ret;

return cdns_update_config() ?


> +}
> +EXPORT_SYMBOL(sdw_cdns_exit_reset);
> +
> +/**
> + * sdw_cdns_enable_interrupt() - Enable SDW interrupts and update config
> + * @cdns: Cadence instance
> + */
> +int sdw_cdns_enable_interrupt(struct sdw_cdns *cdns)
> {
> u32 mask;
>
> @@ -784,24 +835,8 @@ static int _cdns_enable_interrupt(struct sdw_cdns *cdns)
>
> cdns_writel(cdns, CDNS_MCP_INTMASK, mask);
>
> - return 0;
> -}
> -
> -/**
> - * sdw_cdns_enable_interrupt() - Enable SDW interrupts and update config
> - * @cdns: Cadence instance
> - */
> -int sdw_cdns_enable_interrupt(struct sdw_cdns *cdns)
> -{
> - int ret;
> -
> - _cdns_enable_interrupt(cdns);
> - ret = cdns_clear_bit(cdns, CDNS_MCP_CONFIG_UPDATE,
> - CDNS_MCP_CONFIG_UPDATE_BIT);
> - if (ret < 0)
> - dev_err(cdns->dev, "Config update timedout\n");
> -
> - return ret;
> + /* commit changes */
> + return cdns_update_config(cdns);
> }
> EXPORT_SYMBOL(sdw_cdns_enable_interrupt);
>
> @@ -975,6 +1010,10 @@ int sdw_cdns_init(struct sdw_cdns *cdns)
> cdns_writel(cdns, CDNS_MCP_SSP_CTRL0, CDNS_DEFAULT_SSP_INTERVAL);
> cdns_writel(cdns, CDNS_MCP_SSP_CTRL1, CDNS_DEFAULT_SSP_INTERVAL);
>
> + /* flush command FIFOs */
> + cdns_updatel(cdns, CDNS_MCP_CONTROL, CDNS_MCP_CONTROL_CMD_RST,
> + CDNS_MCP_CONTROL_CMD_RST);
> +
> /* Set cmd accept mode */
> cdns_updatel(cdns, CDNS_MCP_CONTROL, CDNS_MCP_CONTROL_CMD_ACCEPT,
> CDNS_MCP_CONTROL_CMD_ACCEPT);
> @@ -997,13 +1036,10 @@ int sdw_cdns_init(struct sdw_cdns *cdns)
> /* Set cmd mode for Tx and Rx cmds */
> val &= ~CDNS_MCP_CONFIG_CMD;
>
> - /* Set operation to normal */
> - val &= ~CDNS_MCP_CONFIG_OP;
> - val |= CDNS_MCP_CONFIG_OP_NORMAL;
> -
> cdns_writel(cdns, CDNS_MCP_CONFIG, val);
>
> - return 0;
> + /* commit changes */
> + return cdns_update_config(cdns);
> }
> EXPORT_SYMBOL(sdw_cdns_init);
>
> diff --git a/drivers/soundwire/cadence_master.h b/drivers/soundwire/cadence_master.h
> index 0b72b7094735..1a67728c5000 100644
> --- a/drivers/soundwire/cadence_master.h
> +++ b/drivers/soundwire/cadence_master.h
> @@ -161,6 +161,7 @@ irqreturn_t sdw_cdns_thread(int irq, void *dev_id);
> int sdw_cdns_init(struct sdw_cdns *cdns);
> int sdw_cdns_pdi_init(struct sdw_cdns *cdns,
> struct sdw_cdns_stream_config config);
> +int sdw_cdns_exit_reset(struct sdw_cdns *cdns);
> int sdw_cdns_enable_interrupt(struct sdw_cdns *cdns);
>
> #ifdef CONFIG_DEBUG_FS
> diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c
> index 13c54eac0cc3..5f14c6acce80 100644
> --- a/drivers/soundwire/intel.c
> +++ b/drivers/soundwire/intel.c

As I have said in the past it doesnt help having a patch touching two
components. The patch is titled cadence!

> @@ -1043,8 +1043,6 @@ static int intel_probe(struct platform_device *pdev)
> if (ret)
> goto err_init;
>
> - ret = sdw_cdns_enable_interrupt(&sdw->cdns);
> -
> /* Read the PDI config and initialize cadence PDI */
> intel_pdi_init(sdw, &config);
> ret = sdw_cdns_pdi_init(&sdw->cdns, config);
> @@ -1062,6 +1060,18 @@ static int intel_probe(struct platform_device *pdev)
> goto err_init;
> }
>
> + ret = sdw_cdns_enable_interrupt(&sdw->cdns);
> + if (ret < 0) {
> + dev_err(sdw->cdns.dev, "cannot enable interrupts\n");
> + goto err_init;
> + }
> +
> + ret = sdw_cdns_exit_reset(&sdw->cdns);
> + if (ret < 0) {
> + dev_err(sdw->cdns.dev, "unable to exit bus reset sequence\n");
> + goto err_init;

Don't you want to disable interrupts at least... before you return
error? err_init does bus cleanup and not controller one

--
~Vinod

\
 
 \ /
  Last update: 2019-09-04 09:13    [W:0.143 / U:1.276 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site