lkml.org 
[lkml]   [2019]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/3] x86/boot: Introduce the kernel_info
On Fri, Jul 12, 2019 at 09:04:23AM -0700, hpa@zytor.com wrote:
> On July 4, 2019 9:36:10 AM PDT, Daniel Kiper <daniel.kiper@oracle.com> wrote:
> >The relationships between the headers are analogous to the various data
> >sections:
> >
> > setup_header = .data
> > boot_params/setup_data = .bss
> >
> >What is missing from the above list? That's right:
> >
> > kernel_info = .rodata
> >
> >We have been (ab)using .data for things that could go into .rodata or
> >.bss for
> >a long time, for lack of alternatives and -- especially early on --
> >inertia.
> >Also, the BIOS stub is responsible for creating boot_params, so it
> >isn't
> >available to a BIOS-based loader (setup_data is, though).
> >
> >setup_header is permanently limited to 144 bytes due to the reach of
> >the
> >2-byte jump field, which doubles as a length field for the structure,
> >combined
> >with the size of the "hole" in struct boot_params that a protected-mode
> >loader
> >or the BIOS stub has to copy it into. It is currently 119 bytes long,
> >which
> >leaves us with 25 very precious bytes. This isn't something that can be
> >fixed
> >without revising the boot protocol entirely, breaking backwards
> >compatibility.
> >
> >boot_params proper is limited to 4096 bytes, but can be arbitrarily
> >extended
> >by adding setup_data entries. It cannot be used to communicate
> >properties of
> >the kernel image, because it is .bss and has no image-provided content.
> >
> >kernel_info solves this by providing an extensible place for
> >information about
> >the kernel image. It is readonly, because the kernel cannot rely on a
> >bootloader copying its contents anywhere, but that is OK; if it becomes
> >necessary it can still contain data items that an enabled bootloader
> >would be
> >expected to copy into a setup_data chunk.
> >
> >This patch does not bump setup_header version in arch/x86/boot/header.S
> >because it will be followed by additional changes coming into the
> >Linux/x86 boot protocol.
> >
> >Suggested-by: H. Peter Anvin <hpa@zytor.com>
> >Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
> >Reviewed-by: Eric Snowberg <eric.snowberg@oracle.com>
> >Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
> >---
> >v2 - suggestions/fixes:
> > - rename setup_header2 to kernel_info,
> > (suggested by H. Peter Anvin),
> > - change kernel_info.header value to "InfO" (0x4f666e49),
> > - new kernel_info description in Documentation/x86/boot.rst,
> > (suggested by H. Peter Anvin),
> > - drop kernel_info_offset_update() as an overkill and
> > update kernel_info offset directly from main(),
> > (suggested by Eric Snowberg),
> > - new commit message
> > (suggested by H. Peter Anvin),
> > - fix some commit message misspellings
> > (suggested by Eric Snowberg).
> >---
> >Documentation/x86/boot.rst | 89
> >++++++++++++++++++++++++++++++++++
> > arch/x86/boot/Makefile | 2 +-
> > arch/x86/boot/compressed/Makefile | 4 +-
> > arch/x86/boot/compressed/kernel_info.S | 12 +++++
> > arch/x86/boot/header.S | 1 +
> > arch/x86/boot/tools/build.c | 5 ++
> > arch/x86/include/uapi/asm/bootparam.h | 1 +
> > 7 files changed, 111 insertions(+), 3 deletions(-)
> > create mode 100644 arch/x86/boot/compressed/kernel_info.S
> >
> >diff --git a/Documentation/x86/boot.rst b/Documentation/x86/boot.rst
> >index 08a2f100c0e6..a934a56f0516 100644
> >--- a/Documentation/x86/boot.rst
> >+++ b/Documentation/x86/boot.rst
> >@@ -68,8 +68,25 @@ Protocol 2.12 (Kernel 3.8) Added the xloadflags
> >field and extension fields
> > Protocol 2.13 (Kernel 3.14) Support 32- and 64-bit flags being set in
> > xloadflags to support booting a 64-bit kernel from 32-bit
> > EFI
> >+
> >+Protocol 2.14: BURNT BY INCORRECT COMMIT
> >ae7e1238e68f2a472a125673ab506d49158c1889
> >+ (x86/boot: Add ACPI RSDP address to setup_header)
> >+ DO NOT USE!!! ASSUME SAME AS 2.13.
> >+
> >+Protocol 2.15: (Kernel 5.3) Added the kernel_info.
> >============= ============================================================
> >
> >+.. note::
> >+ The protocol version number should be changed only if the setup
> >header
> >+ is changed. There is no need to update the version number if
> >boot_params
> >+ or kernel_info are changed. Additionally, it is recommended to
> >use
> >+ xloadflags (in this case the protocol version number should not
> >be
> >+ updated either) or kernel_info to communicate supported Linux
> >kernel
> >+ features to the boot loader. Due to very limited space available
> >in
> >+ the original setup header every update to it should be considered
> >+ with great care. Starting from the protocol 2.15 the primary way
> >to
> >+ communicate things to the boot loader is the kernel_info.
> >+
> >
> > Memory Layout
> > =============
> >@@ -207,6 +224,7 @@ Offset/Size Proto Name Meaning
> > 0258/8 2.10+ pref_address Preferred loading address
> > 0260/4 2.10+ init_size Linear memory required during initialization
> > 0264/4 2.11+ handover_offset Offset of handover entry point
> >+0268/4 2.15+ kernel_info_offset Offset of the kernel_info
> >=========== ======== ===================== ============================================
> >
> > .. note::
> >@@ -855,6 +873,77 @@ Offset/size: 0x264/4
> >
> > See EFI HANDOVER PROTOCOL below for more details.
> >
> >+============ ==================
> >+Field name: kernel_info_offset
> >+Type: read
> >+Offset/size: 0x268/4
> >+Protocol: 2.15+
> >+============ ==================
> >+
> >+ This field is the offset from the beginning of the kernel image to
> >the
> >+ kernel_info. It is embedded in the Linux image in the uncompressed
> >+ protected mode region.
> >+
> >+
> >+The kernel_info
> >+===============
> >+
> >+The relationships between the headers are analogous to the various
> >data
> >+sections:
> >+
> >+ setup_header = .data
> >+ boot_params/setup_data = .bss
> >+
> >+What is missing from the above list? That's right:
> >+
> >+ kernel_info = .rodata
> >+
> >+We have been (ab)using .data for things that could go into .rodata or
> >.bss for
> >+a long time, for lack of alternatives and -- especially early on --
> >inertia.
> >+Also, the BIOS stub is responsible for creating boot_params, so it
> >isn't
> >+available to a BIOS-based loader (setup_data is, though).
> >+
> >+setup_header is permanently limited to 144 bytes due to the reach of
> >the
> >+2-byte jump field, which doubles as a length field for the structure,
> >combined
> >+with the size of the "hole" in struct boot_params that a
> >protected-mode loader
> >+or the BIOS stub has to copy it into. It is currently 119 bytes long,
> >which
> >+leaves us with 25 very precious bytes. This isn't something that can
> >be fixed
> >+without revising the boot protocol entirely, breaking backwards
> >compatibility.
> >+
> >+boot_params proper is limited to 4096 bytes, but can be arbitrarily
> >extended
> >+by adding setup_data entries. It cannot be used to communicate
> >properties of
> >+the kernel image, because it is .bss and has no image-provided
> >content.
> >+
> >+kernel_info solves this by providing an extensible place for
> >information about
> >+the kernel image. It is readonly, because the kernel cannot rely on a
> >+bootloader copying its contents anywhere, but that is OK; if it
> >becomes
> >+necessary it can still contain data items that an enabled bootloader
> >would be
> >+expected to copy into a setup_data chunk.
> >+
> >+It is recommended to not store large data chunks, e.g. strings,
> >directly in the
> >+kernel_info struct. Such data should be placed outside of it and
> >pointed from
> >+the kernel_info structure using offsets from the beginning of the
> >structure,
> >+the kernel_info.header field.
> >+
> >+
> >+Details of the kernel_info Fields
> >+=================================
> >+
> >+============ ========
> >+Field name: header
> >+Offset/size: 0x0000/4
> >+============ ========
> >+
> >+ Contains the magic number "InfO" (0x4f666e49).
> >+
> >+============ ========
> >+Field name: size
> >+Offset/size: 0x0004/4
> >+============ ========
> >+
> >+ This field contains the size of the kernel_info including
> >kernel_info.header.
> >+ It should be used by the boot loader to detect supported fields in
> >the kernel_info.
> >+
> >
> > The Image Checksum
> > ==================
> >diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
> >index e2839b5c246c..c30a9b642a86 100644
> >--- a/arch/x86/boot/Makefile
> >+++ b/arch/x86/boot/Makefile
> >@@ -87,7 +87,7 @@ $(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
> >
> > SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
> >
> >-sed-zoffset := -e 's/^\([0-9a-fA-F]*\) [ABCDGRSTVW]
> >\(startup_32\|startup_64\|efi32_stub_entry\|efi64_stub_entry\|efi_pe_entry\|input_data\|_end\|_ehead\|_text\|z_.*\)$$/\#define
> >ZO_\2 0x\1/p'
> >+sed-zoffset := -e 's/^\([0-9a-fA-F]*\) [ABCDGRSTVW]
> >\(startup_32\|startup_64\|efi32_stub_entry\|efi64_stub_entry\|efi_pe_entry\|input_data\|kernel_info\|_end\|_ehead\|_text\|z_.*\)$$/\#define
> >ZO_\2 0x\1/p'
> >
> > quiet_cmd_zoffset = ZOFFSET $@
> > cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@
> >diff --git a/arch/x86/boot/compressed/Makefile
> >b/arch/x86/boot/compressed/Makefile
> >index 6b84afdd7538..fad3b18e2cc3 100644
> >--- a/arch/x86/boot/compressed/Makefile
> >+++ b/arch/x86/boot/compressed/Makefile
> >@@ -72,8 +72,8 @@ $(obj)/../voffset.h: vmlinux FORCE
> >
> > $(obj)/misc.o: $(obj)/../voffset.h
> >
> >-vmlinux-objs-y := $(obj)/vmlinux.lds $(obj)/head_$(BITS).o
> >$(obj)/misc.o \
> >- $(obj)/string.o $(obj)/cmdline.o $(obj)/error.o \
> >+vmlinux-objs-y := $(obj)/vmlinux.lds $(obj)/kernel_info.o
> >$(obj)/head_$(BITS).o \
> >+ $(obj)/misc.o $(obj)/string.o $(obj)/cmdline.o $(obj)/error.o \
> > $(obj)/piggy.o $(obj)/cpuflags.o
> >
> > vmlinux-objs-$(CONFIG_EARLY_PRINTK) += $(obj)/early_serial_console.o
> >diff --git a/arch/x86/boot/compressed/kernel_info.S
> >b/arch/x86/boot/compressed/kernel_info.S
> >new file mode 100644
> >index 000000000000..3f1cb301b9ff
> >--- /dev/null
> >+++ b/arch/x86/boot/compressed/kernel_info.S
> >@@ -0,0 +1,12 @@
> >+/* SPDX-License-Identifier: GPL-2.0 */
> >+
> >+ .section ".rodata.kernel_info", "a"
> >+
> >+ .global kernel_info
> >+
> >+kernel_info:
> >+ /* Header. */
> >+ .ascii "InfO"
> >+ /* Size. */
> >+ .long kernel_info_end - kernel_info
> >+kernel_info_end:
> >diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
> >index 850b8762e889..ec6a25a43148 100644
> >--- a/arch/x86/boot/header.S
> >+++ b/arch/x86/boot/header.S
> >@@ -557,6 +557,7 @@ pref_address: .quad LOAD_PHYSICAL_ADDR # preferred
> >load addr
> >
> > init_size: .long INIT_SIZE # kernel initialization size
> > handover_offset: .long 0 # Filled in by build.c
> >+kernel_info_offset: .long 0 # Filled in by build.c
> >
> ># End of setup header
> >#####################################################
> >
> >diff --git a/arch/x86/boot/tools/build.c b/arch/x86/boot/tools/build.c
> >index a93d44e58f9c..55e669d29e54 100644
> >--- a/arch/x86/boot/tools/build.c
> >+++ b/arch/x86/boot/tools/build.c
> >@@ -56,6 +56,7 @@ u8 buf[SETUP_SECT_MAX*512];
> > unsigned long efi32_stub_entry;
> > unsigned long efi64_stub_entry;
> > unsigned long efi_pe_entry;
> >+unsigned long kernel_info;
> > unsigned long startup_64;
> >
> >/*----------------------------------------------------------------------*/
> >@@ -321,6 +322,7 @@ static void parse_zoffset(char *fname)
> > PARSE_ZOFS(p, efi32_stub_entry);
> > PARSE_ZOFS(p, efi64_stub_entry);
> > PARSE_ZOFS(p, efi_pe_entry);
> >+ PARSE_ZOFS(p, kernel_info);
> > PARSE_ZOFS(p, startup_64);
> >
> > p = strchr(p, '\n');
> >@@ -410,6 +412,9 @@ int main(int argc, char ** argv)
> >
> > efi_stub_entry_update();
> >
> >+ /* Update kernel_info offset. */
> >+ put_unaligned_le32(kernel_info, &buf[0x268]);
> >+
> > crc = partial_crc32(buf, i, crc);
> > if (fwrite(buf, 1, i, dest) != i)
> > die("Writing setup failed");
> >diff --git a/arch/x86/include/uapi/asm/bootparam.h
> >b/arch/x86/include/uapi/asm/bootparam.h
> >index 60733f137e9a..b05318112452 100644
> >--- a/arch/x86/include/uapi/asm/bootparam.h
> >+++ b/arch/x86/include/uapi/asm/bootparam.h
> >@@ -86,6 +86,7 @@ struct setup_header {
> > __u64 pref_address;
> > __u32 init_size;
> > __u32 handover_offset;
> >+ __u32 kernel_info_offset;
> > } __attribute__((packed));
> >
> > struct sys_desc_table {
>
> I should like to make make things a bit more stringent: additional
> data should be made offsets from the kernel_info structure *and they
> should live in the .rodata.kernel_info section*. We should add a size

OK.

> field for the entire .kernel_info section, thus ensuring it is a
> single self-contained blob.

.rodata.kernel_info contains its total size immediately behind the
"InfO" header. Do you suggest that we should add the size of
.rodata.kernel_info into setup_header too?

Daniel

\
 
 \ /
  Last update: 2019-09-30 17:04    [W:0.103 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site