lkml.org 
[lkml]   [2019]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] mmc: sdhi: fill in actual_clock
On Thu, 29 Aug 2019 at 20:36, Tamás Szűcs <tszucs@protonmail.ch> wrote:
>
> Save set clock in mmc_host actual_clock enabling exporting it via debugfs.
> This will indicate the precise SD clock in I/O settings rather than only the
> sometimes misleading requested clock.
>
> Signed-off-by: Tamás Szűcs <tszucs@protonmail.ch>

Applied for next, thanks!

Kind regards
Uffe


> ---
> drivers/mmc/host/renesas_sdhi_core.c | 13 ++++++++-----
> 1 file changed, 8 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
> index 64d3b5fb7fe5..4c9774dbcfc1 100644
> --- a/drivers/mmc/host/renesas_sdhi_core.c
> +++ b/drivers/mmc/host/renesas_sdhi_core.c
> @@ -124,7 +124,7 @@ static unsigned int renesas_sdhi_clk_update(struct tmio_mmc_host *host,
> {
> struct renesas_sdhi *priv = host_to_priv(host);
> unsigned int freq, diff, best_freq = 0, diff_min = ~0;
> - int i, ret;
> + int i;
>
> /* tested only on R-Car Gen2+ currently; may work for others */
> if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
> @@ -153,9 +153,9 @@ static unsigned int renesas_sdhi_clk_update(struct tmio_mmc_host *host,
> }
> }
>
> - ret = clk_set_rate(priv->clk, best_freq);
> + clk_set_rate(priv->clk, best_freq);
>
> - return ret == 0 ? best_freq : clk_get_rate(priv->clk);
> + return clk_get_rate(priv->clk);
> }
>
> static void renesas_sdhi_set_clock(struct tmio_mmc_host *host,
> @@ -166,10 +166,13 @@ static void renesas_sdhi_set_clock(struct tmio_mmc_host *host,
> sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
> sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
>
> - if (new_clock == 0)
> + if (new_clock == 0) {
> + host->mmc->actual_clock = 0;
> goto out;
> + }
>
> - clock = renesas_sdhi_clk_update(host, new_clock) / 512;
> + host->mmc->actual_clock = renesas_sdhi_clk_update(host, new_clock);
> + clock = host->mmc->actual_clock / 512;
>
> for (clk = 0x80000080; new_clock >= (clock << 1); clk >>= 1)
> clock <<= 1;
> --
> 2.11.0
>

\
 
 \ /
  Last update: 2019-09-03 17:11    [W:0.050 / U:0.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site