lkml.org 
[lkml]   [2019]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] iio: imu: st_lsm6dsx: replace underscore with hyphen in device name
+CC Greg as fix for a patch in my outstanding pull request.

On Tue, 3 Sep 2019 07:18:02 +0200
Martin Kepplinger <martin.kepplinger@puri.sm> wrote:

> With the underscore character in the lsm9ds1_imu device name, we get the
> following error below, so use a dash, just like the other device names do too.
>
> [ 3.961399] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
> [ 4.010581] Mem abort info:
> [ 4.013838] ESR = 0x96000004
> [ 4.023602] Exception class = DABT (current EL), IL = 32 bits
> [ 4.047993] SET = 0, FnV = 0
> [ 4.052690] EA = 0, S1PTW = 0
> [ 4.056015] Data abort info:
> [ 4.059020] ISV = 0, ISS = 0x00000004
> [ 4.080106] CM = 0, WnR = 0
> [ 4.085237] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000e4f61000
> [ 4.092194] [0000000000000018] pgd=0000000000000000
> [ 4.097474] Internal error: Oops: 96000004 [#1] PREEMPT SMP
> [ 4.103286] Modules linked in: tcpci st_sensors st_lsm6dsx_i2c(+) tcpm st_lsm6dsx industrialio_triggered_buffer kfifo_buf vcnl4000 roles typec goodix snd_soc_sgtl5000 bq25890_charger snvs_pwrkey imx_sdma virt_dma qoriq_thermal imx2_wdt snd_soc_fsl_sai aes_ce_blk imx_pcm_dma crypto_simd watchdog crct10dif_ce ghash_ce sha2_ce snd_soc_simple_card snd_soc_gtm601 snd_soc_simple_card_utils sha1_ce snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer snd soundcore gpio_vibra usb_f_acm u_serial usb_f_rndis g_multi usb_f_mass_storage u_ether libcomposite ip_tables x_tables ipv6 nf_defrag_ipv6 xhci_plat_hcd xhci_hcd usbcore dwc3 ulpi udc_core usb_common phy_fsl_imx8mq_usb
> [ 4.105389] bq25890-charger 0-006b: Capacity for 3784000 is 86%
> [ 4.164061] CPU: 1 PID: 344 Comm: systemd-udevd Tainted: G W 5.3.0-rc2-g24e3d989d49f-dirty #161
> [ 4.164063] Hardware name: Purism Librem 5 devkit (DT)
> [ 4.164067] pstate: 80000005 (Nzcv daif -PAN -UAO)
> [ 4.164082] pc : st_lsm6dsx_i2c_probe+0x18/0x80 [st_lsm6dsx_i2c]
> [ 4.164093] lr : i2c_device_probe+0x1f0/0x2b8
> [ 4.164094] sp : ffff8000a499f970
> [ 4.164097] x29: ffff8000a499f970 x28: 0000000000000000
> [ 4.164100] x27: ffff000010b70000 x26: ffff8000a499fd68
> [ 4.164104] x25: ffff000010860000 x24: ffff000008a8b038
> [ 4.164108] x23: ffff000008a8b038 x22: ffff000008a8b000
> [ 4.164111] x21: ffff8000a55b2400 x20: ffff000008a89000
> [ 4.164115] x19: ffff8000a55b2400 x18: ffffffffffffffff
> [ 4.164118] x17: 0000000000000000 x16: 0000000000000000
> [ 4.164121] x15: 0000000000040000 x14: 00000000fffffff0
> [ 4.164125] x13: ffff000010b6c898 x12: 0000000000000030
> [ 4.164128] x11: 0000000000000000 x10: 0101010101010101
> [ 4.260542] x9 : fffffffffffffffc x8 : 0000000000000008
> [ 4.266073] x7 : 0000000000000004 x6 : 1e0e1a00f2ade4ef
> [ 4.271605] x5 : 6f642d72001a0e1e x4 : 8080808000000000
> [ 4.277136] x3 : 0000000000000000 x2 : ffff000008a8a000
> [ 4.282667] x1 : 0000000000000000 x0 : ffff8000a55b2400
> [ 4.288199] Call trace:
> [ 4.290753] st_lsm6dsx_i2c_probe+0x18/0x80 [st_lsm6dsx_i2c]
> [ 4.296648] i2c_device_probe+0x1f0/0x2b8
> [ 4.300825] really_probe+0x168/0x368
> [ 4.304638] driver_probe_device.part.2+0x10c/0x128
> [ 4.309716] device_driver_attach+0x74/0xa0
> [ 4.314071] __driver_attach+0x84/0x130
> [ 4.318065] bus_for_each_dev+0x68/0xc8
> [ 4.322058] driver_attach+0x20/0x28
> [ 4.325780] bus_add_driver+0xd4/0x1f8
> [ 4.329683] driver_register+0x60/0x110
> [ 4.333677] i2c_register_driver+0x44/0x98
> [ 4.337944] st_lsm6dsx_driver_init+0x1c/0x1000 [st_lsm6dsx_i2c]
> [ 4.344200] do_one_initcall+0x58/0x1a8
> [ 4.348195] do_init_module+0x54/0x1d4
> [ 4.352098] load_module+0x1998/0x1c40
> [ 4.356001] __se_sys_finit_module+0xc0/0xd8
> [ 4.360446] __arm64_sys_finit_module+0x14/0x20
> [ 4.365166] el0_svc_common.constprop.0+0xb0/0x168
> [ 4.370154] el0_svc_handler+0x18/0x20
> [ 4.374056] el0_svc+0x8/0xc
> [ 4.377059] Code: d2800003 910003fd a90153f3 aa0003f3 (f9400c34)
> [ 4.383406] ---[ end trace 6dfe010c028e3371 ]---
>

> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Fixes: a106864fd667 ("iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1")

Thanks Martin. This one is entirely my fault for messing up tweaking
that naming. I should have bounced the patch back for another round
rather than thinking "it's trivial, what could possibly go wrong!"

On basis Greg may prefer to pick this one directly:

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Convenient lore.kernel.org link.

https://lore.kernel.org/linux-iio/20190903051802.22716-1-martin.kepplinger@puri.sm/T/#u


If not I'll pick it up for first set of fixes post rc1.

As for the question below, I've not taken a look yet and certainly seems
an odd result!

Thanks,

Jonathan



> ---
>
> While this patch fixes my (formerly already mentioned) issue, it's
> a question actually: Why does is this underscore character a problem?
>
> thanks,
>
> martin
>
>
>
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> index 5e3cd96b0059..80e42c7dbcbe 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> @@ -24,7 +24,7 @@
> #define ST_LSM6DSR_DEV_NAME "lsm6dsr"
> #define ST_LSM6DS3TRC_DEV_NAME "lsm6ds3tr-c"
> #define ST_ISM330DHCX_DEV_NAME "ism330dhcx"
> -#define ST_LSM9DS1_DEV_NAME "lsm9ds1_imu"
> +#define ST_LSM9DS1_DEV_NAME "lsm9ds1-imu"
>
> enum st_lsm6dsx_hw_id {
> ST_LSM6DS3_ID,


\
 
 \ /
  Last update: 2019-09-03 14:44    [W:0.075 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site