lkml.org 
[lkml]   [2019]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 0/3] keep console alive even if missing the 'enable' clock
On Mon, 26 Aug 2019 at 15:29, Chunyan Zhang <zhang.lyra@gmail.com> wrote:
>
> From: Chunyan Zhang <chunyan.zhang@unisoc.com>
>
> After the commit 4007098f4ce4 (serial: sprd: Add power management for the Spreadtrum serial controller),
> the 'enable' clock was forced to be configured in device tree, otherwise the uart devices couldn't be
> probed successfully.
>
> With this patch-set, the uart device which is used as console would be allowed to register even without
> any clock configured in device tree, this will make debug easier.

Tested on my board, works well and looks good to me. So for the whole series:
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>

>
> Chunyan Zhang (3):
> serial: sprd: check the right port and membase
> serial: sprd: add console_initcall in sprd's uart driver
> serial: sprd: keep console alive even if missing the 'enable' clock
>
> drivers/tty/serial/sprd_serial.c | 42 ++++++++++++++++++++++++++------
> 1 file changed, 34 insertions(+), 8 deletions(-)
>
> --
> 2.20.1
>


--
Baolin Wang
Best Regards

\
 
 \ /
  Last update: 2019-09-03 11:22    [W:0.039 / U:5.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site