lkml.org 
[lkml]   [2019]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v6 7/7] media: imx214: Add new control with V4L2_CID_UNIT_CELL_SIZE
Hi Hans

On Fri, 27 Sep 2019, 09:14 Hans Verkuil, <hverkuil-cisco@xs4all.nl> wrote:
>
> On 9/20/19 3:51 PM, Ricardo Ribalda Delgado wrote:
> > From: Ricardo Ribalda Delgado <ribalda@kernel.org>
> >
> > According to the product brief, the unit cell size is 1120 nanometers^2.
> >
> > https://www.sony-semicon.co.jp/products_en/IS/sensor1/img/products/ProductBrief_IMX214_20150428.pdf
> >
> > Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
> > ---
> > drivers/media/i2c/imx214.c | 12 ++++++++++++
> > 1 file changed, 12 insertions(+)
> >
> > diff --git a/drivers/media/i2c/imx214.c b/drivers/media/i2c/imx214.c
> > index 159a3a604f0e..57562e20c4ca 100644
> > --- a/drivers/media/i2c/imx214.c
> > +++ b/drivers/media/i2c/imx214.c
> > @@ -47,6 +47,7 @@ struct imx214 {
> > struct v4l2_ctrl *pixel_rate;
> > struct v4l2_ctrl *link_freq;
> > struct v4l2_ctrl *exposure;
> > + struct v4l2_ctrl *unit_size;
> >
> > struct regulator_bulk_data supplies[IMX214_NUM_SUPPLIES];
> >
> > @@ -948,6 +949,13 @@ static int imx214_probe(struct i2c_client *client)
> > static const s64 link_freq[] = {
> > IMX214_DEFAULT_LINK_FREQ,
> > };
> > + struct v4l2_area unit_size = {
> > + .width = 1120,
> > + .height = 1120,
> > + };
> > + union v4l2_ctrl_ptr p_def = {
> > + .p_area = &unit_size,
> > + };
>
> Use static const for both.
>
> I think you should add a small static inline helper function to v4l2-ctrls.h that
> takes a void pointer and returns a union v4l2_ctrl_ptr.
>
> Then you don't need to make a union v4l2_ctrl_ptr just to pass the unit_size pointer.
>

That sounds useful, but can we warantee for all the arches that
sizeof(v4l2_ctrl_ptr) <= sizeof (void *)

Of course, it sounds logic, that a union of pointers is the same size
than a pointer... but you never know.

No matter what I will make the helper and resend. with all the changes
from Jacopo

Thanks!

> Regards,



>
> Hans
>
> > int ret;
> >
> > ret = imx214_parse_fwnode(dev);
> > @@ -1029,6 +1037,10 @@ static int imx214_probe(struct i2c_client *client)
> > V4L2_CID_EXPOSURE,
> > 0, 3184, 1, 0x0c70);
> >
> > + imx214->unit_size = v4l2_ctrl_new_std_compound(&imx214->ctrls,
> > + NULL,
> > + V4L2_CID_UNIT_CELL_SIZE,
> > + p_def);
> > ret = imx214->ctrls.error;
> > if (ret) {
> > dev_err(&client->dev, "%s control init failed (%d)\n",
> >
>

\
 
 \ /
  Last update: 2019-09-27 09:34    [W:0.053 / U:3.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site