lkml.org 
[lkml]   [2019]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [v5,1/2] dt-bindings: rtc: pcf85263/pcf85363: add some properties
On Thu, 19 Sep 2019 09:45:19 +0800, Biwen Li wrote:
> Add some properties for pcf85263/pcf85363 as follows:
> - nxp,rtc-interrupt-type: integer type
> - nxp,rtc-interrupt-output-pin: string type
> - quartz-load-femtofarads: integer type
> - quartz-drive-strength-ohms: integer type
> - nxp,quartz-low-jitter: bool type
> - wakeup-source: bool type
>
> Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
> Signed-off-by: Biwen Li <biwen.li@nxp.com>
> ---
> Change in v5:
> - Replace nxp,quartz-drive-strength with
> quartz-drive-strength-ohms
> - Select ohm unit for quartz drive strength
>
> Change in v4:
> - Drop robust defines in include/dt-bindings/rtc/pcf85363.h
> - Add nxp,rtc-interrupt-type property
> - Replace interrupt-output-pin with nxp,rtc-interrupt-output-pin
>
> Change in v3:
> - None
>
> Change in v2:
> - Replace properties name
> quartz-load-capacitance -> quartz-load-femtofarads
> quartz-drive-strength -> nxp,quartz-drive-strength
> quartz-low-jitter -> nxp,quartz-low-jitter
> - Replace drive strength name
> PCF85263_QUARTZDRIVE_NORMAL -> PCF85263_QUARTZDRIVE_100ko
> PCF85263_QUARTZDRIVE_LOW -> PCF85263_QUARTZDRIVE_60ko
> PCF85263_QUARTZDRIVE_HIGH -> PCF85263_QUARTZDRIVE_500ko
> - Set default interrupt-output-pin as "INTA"
>
> .../devicetree/bindings/rtc/pcf85363.txt | 44 ++++++++++++++++++-
> include/dt-bindings/rtc/pcf85363.h | 14 ++++++
> 2 files changed, 57 insertions(+), 1 deletion(-)
> create mode 100644 include/dt-bindings/rtc/pcf85363.h
>

Reviewed-by: Rob Herring <robh@kernel.org>

\
 
 \ /
  Last update: 2019-09-27 18:14    [W:0.041 / U:3.592 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site