lkml.org 
[lkml]   [2019]   [Sep]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 01/21] dt-bindings: PCI: Endpoint: Add DT bindings for PCI EPF Bus
Date
Add device tree bindings for PCI endpoint function bus to which
endpoint function devices should be attached.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
.../bindings/pci/endpoint/pci-epf-bus.txt | 27 +++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/endpoint/pci-epf-bus.txt

diff --git a/Documentation/devicetree/bindings/pci/endpoint/pci-epf-bus.txt b/Documentation/devicetree/bindings/pci/endpoint/pci-epf-bus.txt
new file mode 100644
index 000000000000..16727ddf01f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/endpoint/pci-epf-bus.txt
@@ -0,0 +1,27 @@
+PCI Endpoint Function Bus
+
+This describes the bindings for endpoint function bus to which endpoint
+function devices should be attached.
+
+Required Properties:
+ - compatible: Should be "pci-epf-bus"
+
+One or more subnodes representing PCIe endpoint function device exposed
+to the remote host.
+
+Example:
+Following is an example of NTB device exposed to the remote host.
+
+epf_bus {
+ compatible = "pci-epf-bus";
+
+ ntb {
+ compatible = "pci-epf-ntb";
+ epcs = <&pcie0_ep>, <&pcie1_ep>;
+ epc-names = "primary", "secondary";
+ vendor-id = /bits/ 16 <0x104c>;
+ device-id = /bits/ 16 <0xb00d>;
+ num-mws = <4>;
+ mws-size = <0x100000>, <0x100000>, <0x100000>, <0x100000>;
+ };
+};
--
2.17.1
\
 
 \ /
  Last update: 2019-09-26 13:32    [W:0.102 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site