lkml.org 
[lkml]   [2019]   [Sep]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 0/3] Add MMC software queue support
Hi Adrian and Ulf,

On Thu, 19 Sep 2019 at 13:59, Baolin Wang <baolin.wang@linaro.org> wrote:
>
> Hi All,
>
> Now the MMC read/write stack will always wait for previous request is
> completed by mmc_blk_rw_wait(), before sending a new request to hardware,
> or queue a work to complete request, that will bring context switching
> overhead, especially for high I/O per second rates, to affect the IO
> performance.
>
> Thus this patch set will introduce the MMC software command queue support
> based on command queue engine's interfaces, and set the queue depth as 2,
> that means we do not need wait for previous request is completed and can
> queue 2 requests in flight. It is enough to let the irq handler always
> trigger the next request without a context switch and then ask the blk_mq
> layer for the next one to get queued, as well as avoiding a long latency.
>
> Moreover we can expand the MMC software queue interface to support
> MMC packed request or packed command instead of adding new interfaces,
> according to previosus discussion.
>
> Below are some comparison data with fio tool. The fio command I used
> is like below with changing the '--rw' parameter and enabling the direct
> IO flag to measure the actual hardware transfer speed in 4K block size.
>
> ./fio --filename=/dev/mmcblk0p30 --direct=1 --iodepth=20 --rw=read --bs=4K --size=512M --group_reporting --numjobs=20 --name=test_read
>
> My eMMC card working at HS400 Enhanced strobe mode:
> [ 2.229856] mmc0: new HS400 Enhanced strobe MMC card at address 0001
> [ 2.237566] mmcblk0: mmc0:0001 HBG4a2 29.1 GiB
> [ 2.242621] mmcblk0boot0: mmc0:0001 HBG4a2 partition 1 4.00 MiB
> [ 2.249110] mmcblk0boot1: mmc0:0001 HBG4a2 partition 2 4.00 MiB
> [ 2.255307] mmcblk0rpmb: mmc0:0001 HBG4a2 partition 3 4.00 MiB, chardev (248:0)
>
> 1. Without MMC software queue
> I tested 3 times for each case and output a average speed.
>
> 1) Sequential read:
> Speed: 28.9MiB/s, 26.4MiB/s, 30.9MiB/s
> Average speed: 28.7MiB/s
>
> 2) Random read:
> Speed: 18.2MiB/s, 8.9MiB/s, 15.8MiB/s
> Average speed: 14.3MiB/s
>
> 3) Sequential write:
> Speed: 21.1MiB/s, 27.9MiB/s, 25MiB/s
> Average speed: 24.7MiB/s
>
> 4) Random write:
> Speed: 21.5MiB/s, 18.1MiB/s, 18.1MiB/s
> Average speed: 19.2MiB/s
>
> 2. With MMC software queue
> I tested 3 times for each case and output a average speed.
>
> 1) Sequential read:
> Speed: 44.1MiB/s, 42.3MiB/s, 44.4MiB/s
> Average speed: 43.6MiB/s
>
> 2) Random read:
> Speed: 30.6MiB/s, 30.9MiB/s, 30.5MiB/s
> Average speed: 30.6MiB/s
>
> 3) Sequential write:
> Speed: 44.1MiB/s, 45.9MiB/s, 44.2MiB/s
> Average speed: 44.7MiB/s
>
> 4) Random write:
> Speed: 45.1MiB/s, 43.3MiB/s, 42.4MiB/s
> Average speed: 43.6MiB/s
>
> Form above data, we can see the MMC software queue can help to improve the
> performance obviously.
>
> Any comments are welcome. Thanks a lot.
>
> Changes from v2:
> - Remove reference to 'struct cqhci_host' and 'struct cqhci_slot',
> instead adding 'struct sqhci_host', which is only used by software queue.
>
> Changes from v1:
> - Add request_done ops for sdhci_ops.
> - Replace virtual command queue with software queue for functions and
> variables.
> - Rename the software queue file and add sqhci.h header file.

Do you have any comments for this patch set except the random config
building issue that will be fixed in the next version? Thanks.

>
> Baolin Wang (3):
> mmc: Add MMC software queue support
> mmc: host: sdhci: Add request_done ops for struct sdhci_ops
> mmc: host: sdhci-sprd: Add software queue support
>
> drivers/mmc/core/block.c | 61 ++++++++
> drivers/mmc/core/mmc.c | 13 +-
> drivers/mmc/core/queue.c | 25 ++-
> drivers/mmc/host/Kconfig | 9 ++
> drivers/mmc/host/Makefile | 1 +
> drivers/mmc/host/sdhci-sprd.c | 26 ++++
> drivers/mmc/host/sdhci.c | 12 +-
> drivers/mmc/host/sdhci.h | 2 +
> drivers/mmc/host/sqhci.c | 344 +++++++++++++++++++++++++++++++++++++++++
> drivers/mmc/host/sqhci.h | 53 +++++++
> include/linux/mmc/host.h | 3 +
> 11 files changed, 537 insertions(+), 12 deletions(-)
> create mode 100644 drivers/mmc/host/sqhci.c
> create mode 100644 drivers/mmc/host/sqhci.h
>
> --
> 1.7.9.5
>


--
Baolin Wang
Best Regards

\
 
 \ /
  Last update: 2019-09-26 11:44    [W:0.091 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site