lkml.org 
[lkml]   [2019]   [Sep]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Patch V10 0/8] Tegra XUSB gadget driver support
On Mon, Sep 23, 2019 at 01:55:44PM +0530, Nagarjuna Kristam wrote:
> Patches 1-3 are phy driver changes to add support for device
> mode.
> Patches 4-7 are changes related to XUSB device mode
> controller driver.
> Patch 8 is to enable drivers for XUDC support in defconfig
>
> Test Steps(USB 2.0):
> - Enable "USB Gadget precomposed configurations" in defconfig
> - Build, flash and boot Jetson TX1
> - Connect Jetson TX1 and Ubuntu device using USB A to Micro B
> cable
> - After boot on Jetson TX1 terminal usb0 network device should be
> enumerated
> - Assign static ip to usb0 on Jetson TX1 and corresponding net
> device on ubuntu
> - Run ping test and transfer test(used scp) to check data transfer
> communication
>
> SS mode is verified by enabling Type A port as peripheral
> ---
> v10:
> * Patches 1,2,4,5,7,8 - No changes.
> * Patch 3 has braces added to one single line else condition.
> * Patch 6 has update on compatible string as per suggestion from Chunfeng.
> ---
> v9:
> * Patches 1,2,3,4,5 - No changes.
> * Patch 6 has update on compatible string as per suggestion from Chunfeng.
> * Patch 7 has comment fixes as suggested by Chunfeng.
> * Patch 8 has CONFIG_USB_GPIO enabled as module additionally.
> ---
> v8:
> * Patches 1,2,3,4,5,8 - No changes.
> * Patch 6 has update on compatible string as per change done in [1].
> * Patch 7 has issue fix, where device mode didnot got enabled after resume
> from suspend.
> ---
> v7:
> * Patches 1,2,3,4,5,6,8 - No changes.
> * Patch 7 - Comments from Balbi and Chunfun adrresed.
> Added COMPILE_TEST in Kconfig and updated dependencies.
> ---
> v6:
> * Patches 1,2,3,7,8 - No changes.
> * Patch 4,5,6 - Comments from Rob addressed, updated usb connector driver
> compatibility string.
> ---
> v5:
> * Patches 1-3 - Commit subject updated as per inputs from Thierry.
> * Patch 4 - Added reg-names used on Tegra210 in the bindings doc
> * Enabled xudc driver as module instead of part of kernel in patch 8.
> * Patched 5-8 - No changes.
> ---
> v4:
> * patch 1 - no changes.
> * corrected companion device search based on inputs from Thierry in patch 2.
> * removed unneeded dev variable and corrected value read in
> tegra210_utmi_port_reset function in patch 3.
> * dt binding doc and dtb files are corrected for alignments.
> Replaced extcon-usb-gpio with usb role switch.
> * Added support for USB role switch instead of extcon-usb-gpio and other minor
> comments as suggested by Chunfeng.
> * Enabled xudc driver as module instead of part of kernel in patch 8.
> ---
> V3:
> * Rebased patch 1 to top of tree.
> * Fixed bug in patch 2, where xudc interrupts dont get generated if USB host
> mode fails to probe. Moved fake port detection logic to generic xusb.c. fake
> usb port data is updated based on soc flag need_fake_usb3_port.
> * Added extra lines whereever necessary to make code more readable in patch 3
> and 7.
> * dt binding doc is corrected for typos and extcon references. Also added
> details for clocks and removed xusb_ references to clock and power-domain
> names and accordingly patch 5 is updated.
> * removed avdd-pll-utmip-supply in patch 6, as its now part of padctl driver.
> * Patch 8 has no changes.
> ---
> V2:
> * Patches 1-3 are new patches in this series, which splits unified features
> patch to speprated features and removes need of port-fake entry in DT.
> * Patch 4 is re-arragend dt-bindings patch which incorporates previous
> patch comments to sort DT entries alphabetically, addresses name changes
> and PM domain details added.
> * Patch 5-6 are re-arranged DT patches with major changes - sort entries
> alphabetically, and adds clock names.
> * Patch 7 is UDC driver tegra XUSB device mode controller with major
> changes - remove un-used module params, lockinng for device_mode flag,
> moving un-needed info logs to debug level, making changes feature flag
> dependent rather than SOC based macros and other error handling in probe.
> * Patch 8 has no changes.
>
> Nagarjuna Kristam (8):
> phy: tegra: xusb: Add XUSB dual mode support on Tegra210
> phy: tegra: xusb: Add usb3 port fake support on Tegra210
> phy: tegra: xusb: Add vbus override support on Tegra210
> dt-bindings: usb: Add NVIDIA Tegra XUSB device mode controller binding
> arm64: tegra: Add xudc node for Tegra210
> arm64: tegra: Enable xudc on Jetson TX1
> usb: gadget: Add UDC driver for tegra XUSB device mode controller
> arm64: defconfig: Enable tegra XUDC support
>
> .../devicetree/bindings/usb/nvidia,tegra-xudc.txt | 110 +
> arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 31 +-
> arch/arm64/boot/dts/nvidia/tegra210.dtsi | 19 +
> arch/arm64/configs/defconfig | 2 +
> drivers/phy/tegra/xusb-tegra210.c | 134 +-
> drivers/phy/tegra/xusb.c | 87 +
> drivers/phy/tegra/xusb.h | 4 +
> drivers/usb/gadget/udc/Kconfig | 11 +
> drivers/usb/gadget/udc/Makefile | 1 +
> drivers/usb/gadget/udc/tegra-xudc.c | 3787 ++++++++++++++++++++
> include/linux/phy/tegra/xusb.h | 4 +-
> 11 files changed, 4186 insertions(+), 4 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.txt
> create mode 100644 drivers/usb/gadget/udc/tegra-xudc.c

Hi Felipe, Kishon,

since the DT bindings have been acked by Rob, I plan on applying the DTS
changes of the above once v5.4-rc1 is release. Do you have any remaining
concerns about the UDC or PHY patches, respectively?

Thierry
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-09-26 11:05    [W:0.268 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site