lkml.org 
[lkml]   [2019]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND PATCH v2 2/3] dt-bindings: iio: light: add veml6030 ALS bindings
Date
This commit adds device tree bindings for veml6030 ambient
light sensor.

Signed-off-by: Rishi Gupta <gupt21@gmail.com>
---
Changes in v2:
* Corrected grammatical mistake from 'is' to 'are' in description of bindings

.../devicetree/bindings/iio/light/veml6030.yaml | 62 ++++++++++++++++++++++
1 file changed, 62 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/light/veml6030.yaml

diff --git a/Documentation/devicetree/bindings/iio/light/veml6030.yaml b/Documentation/devicetree/bindings/iio/light/veml6030.yaml
new file mode 100644
index 0000000..969b314
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/veml6030.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/veml6030.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VEML6030 Ambient Light Sensor (ALS)
+
+maintainers:
+ - Rishi Gupta <gupt21@gmail.com>
+
+description: |
+ Bindings for the ambient light sensor veml6030 from Vishay
+ Semiconductors over an i2c interface.
+
+ Irrespective of whether interrupt is used or not, application
+ can get the ALS and White channel reading from IIO raw interface.
+
+ If the interrupts are used, application will receive an IIO event
+ whenever configured threshold is crossed.
+
+ Specifications about the sensor can be found at:
+ https://www.vishay.com/docs/84366/veml6030.pdf
+
+properties:
+ compatible:
+ enum:
+ - vishay,veml6030
+
+ reg:
+ description:
+ I2C address of the device. If the ADDR pin on veml6030
+ is pulled up, this address is 0x48. If the ADDR pin is
+ pulled down, this address is 0x10.
+ maxItems: 1
+
+ interrupts:
+ description:
+ interrupt mapping for IRQ. Configure with IRQ_TYPE_LEVEL_LOW.
+ Refer to interrupt-controller/interrupts.txt for generic
+ interrupt client node bindings.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ light-sensor@10 {
+ compatible = "vishay,veml6030";
+ reg = <0x10>;
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+...
--
2.7.4
\
 
 \ /
  Last update: 2019-09-24 12:59    [W:0.104 / U:0.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site