lkml.org 
[lkml]   [2019]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] media: flexcop-usb: fix NULL-ptr deref in flexcop_usb_transfer_init()
Date
If usb_set_interface() failed, iface->cur_altsetting will
not be assigned and it will be used in flexcop_usb_transfer_init()
It may lead a NULL pointer dereference.

Check usb_set_interface() return value in flexcop_usb_init()
and return failed to avoid using this NULL pointer.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
---
drivers/media/usb/b2c2/flexcop-usb.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/media/usb/b2c2/flexcop-usb.c b/drivers/media/usb/b2c2/flexcop-usb.c
index 1826ff8..4bf85e9 100644
--- a/drivers/media/usb/b2c2/flexcop-usb.c
+++ b/drivers/media/usb/b2c2/flexcop-usb.c
@@ -504,7 +504,13 @@ static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb)
static int flexcop_usb_init(struct flexcop_usb *fc_usb)
{
/* use the alternate setting with the larges buffer */
- usb_set_interface(fc_usb->udev,0,1);
+ int ret = usb_set_interface(fc_usb->udev, 0, 1);
+
+ if (ret) {
+ err("set interface failed.");
+ return ret;
+ }
+
switch (fc_usb->udev->speed) {
case USB_SPEED_LOW:
err("cannot handle USB speed because it is too slow.");
--
1.8.3
\
 
 \ /
  Last update: 2019-09-24 11:32    [W:1.047 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site