lkml.org 
[lkml]   [2019]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] PCI: pciehp: Prevent deadlock on disconnect
Hi Lukas,

On Mon, Sep 23, 2019 at 07:34:03AM +0200, Lukas Wunner wrote:
> On Mon, Aug 12, 2019 at 05:31:33PM +0300, Mika Westerberg wrote:
> > If there are more than one PCIe switch with hotplug downstream ports
> > hot-removing them leads to a following deadlock:
>
> For the record, I think my comments on v1 of this patch still apply:
>
> https://patchwork.ozlabs.org/patch/1117870/#2230798

Well, so do I ;-)

As I tried to explain in v1 discussion, I think what we do here in this
patch is correct thing to do regardless. I mean once the hardware is
gone the driver should not do any decisions based on what it thinks it
reads from the now missing hardware. This also makes the deadlock
problem go away on all the system I've been testing. Where previously I
was able to reproduce the deadlock 100% reliably I have not seen it
happen once with this one applied (and haven't got reports from our
internal testing either).

Regarding suggestion of unbinding PCI drivers without
pci_lock_rescan_remove() hold, I haven't looked it too closely but I
think we need to take that lock anyway because when we are unbinding a
hotplug driver it is supposed to remove the hierarchy below touching the
shared structures, possibly concurrently. Unfortunately there is no
documentation what data pci_lock_rescan_remove() actually protects so
first one needs to understand that. I think one way to clean up this is
to use finer grained locking (with documented lock ordering) for PCI bus
structures that can be accessed simultaneusly by different threads. But
that is not a simple task.

\
 
 \ /
  Last update: 2019-09-23 10:13    [W:0.122 / U:3.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site