lkml.org 
[lkml]   [2019]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Linux 5.3.1
On 08:37 Sat 21 Sep 2019, Greg KH wrote:
>I'm announcing the release of the 5.3.1 kernel.
>
>All users of the 5.3 kernel series must upgrade.
>
>The updated 5.3.y git tree can be found at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-5.3.y
>and can be browsed at the normal kernel.org git web browser:
> https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary
>
>thanks,
>
>greg k-h

Thanks, a bunch Greg! :)

Thanks,
Bhaskar
>
>------------
>
> Documentation/filesystems/overlayfs.txt | 2
> Documentation/sphinx/automarkup.py | 2
> Makefile | 2
> arch/arm64/include/asm/pgtable.h | 12 ++-
> drivers/block/floppy.c | 4 -
> drivers/firmware/google/vpd.c | 4 -
> drivers/firmware/google/vpd_decode.c | 55 +++++++++-------
> drivers/firmware/google/vpd_decode.h | 6 -
> drivers/media/usb/dvb-usb/technisat-usb2.c | 22 +++---
> drivers/media/usb/tm6000/tm6000-dvb.c | 3
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 12 ++-
> drivers/net/xen-netfront.c | 2
> drivers/phy/qualcomm/phy-qcom-qmp.c | 33 ++++-----
> drivers/phy/renesas/phy-rcar-gen3-usb2.c | 2
> drivers/tty/serial/atmel_serial.c | 1
> drivers/tty/serial/sprd_serial.c | 2
> drivers/usb/core/config.c | 12 ++-
> fs/overlayfs/ovl_entry.h | 1
> fs/overlayfs/super.c | 73 ++++++++++++++--------
> include/net/pkt_sched.h | 7 +-
> include/net/sock_reuseport.h | 20 +++++-
> net/core/dev.c | 16 +++-
> net/core/sock_reuseport.c | 15 +++-
> net/dsa/dsa2.c | 2
> net/ipv4/datagram.c | 2
> net/ipv4/udp.c | 5 -
> net/ipv6/datagram.c | 2
> net/ipv6/ip6_gre.c | 2
> net/ipv6/udp.c | 5 -
> net/sched/sch_generic.c | 3
> net/wireless/nl80211.c | 4 -
> virt/kvm/coalesced_mmio.c | 19 +++--
> 32 files changed, 226 insertions(+), 126 deletions(-)
>
>Alan Stern (1):
> USB: usbcore: Fix slab-out-of-bounds bug during device reset
>
>Amir Goldstein (1):
> ovl: fix regression caused by overlapping layers detection
>
>Andrew Lunn (1):
> net: dsa: Fix load order between DSA drivers and taggers
>
>Bjorn Andersson (1):
> phy: qcom-qmp: Correct ready status, again
>
>Chunyan Zhang (1):
> serial: sprd: correct the wrong sequence of arguments
>
>Cong Wang (1):
> net_sched: let qdisc_put() accept NULL pointer
>
>Dongli Zhang (1):
> xen-netfront: do not assume sk_buff_head list is empty in error handling
>
>Greg Kroah-Hartman (1):
> Linux 5.3.1
>
>Hung-Te Lin (1):
> firmware: google: check if size is valid when decoding VPD data
>
>Jann Horn (1):
> floppy: fix usercopy direction
>
>Jonathan Neuschäfer (1):
> Documentation: sphinx: Add missing comma to list of strings
>
>Jose Abreu (1):
> net: stmmac: Hold rtnl lock in suspend/resume callbacks
>
>Masashi Honma (1):
> nl80211: Fix possible Spectre-v1 for CQM RSSI thresholds
>
>Matt Delco (1):
> KVM: coalesced_mmio: add bounds checking
>
>Paolo Abeni (1):
> net/sched: fix race between deactivation and dequeue for NOLOCK qdisc
>
>Razvan Stefanescu (1):
> tty/serial: atmel: reschedule TX after RX was started
>
>Sean Young (2):
> media: tm6000: double free if usb disconnect while streaming
> media: technisat-usb2: break out of loop at end of buffer
>
>Will Deacon (1):
> Revert "arm64: Remove unnecessary ISBs from set_{pte,pmd,pud}"
>
>Willem de Bruijn (1):
> udp: correct reuseport selection with connected sockets
>
>Xin Long (1):
> ip6_gre: fix a dst leak in ip6erspan_tunnel_xmit
>
>Yoshihiro Shimoda (1):
> phy: renesas: rcar-gen3-usb2: Disable clearing VBUS in over-current
>


[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-09-23 16:32    [W:0.187 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site