lkml.org 
[lkml]   [2019]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH net-next] tuntap: Fallback to automq on TUNSETSTEERINGEBPF prog negative return
On Sun, Sep 22, 2019 at 3:30 PM Matt Cover <werekraken@gmail.com> wrote:
>
> On Sun, Sep 22, 2019 at 1:36 PM Michael S. Tsirkin <mst@redhat.com> wrote:
> >
> > On Sun, Sep 22, 2019 at 10:43:19AM -0700, Matt Cover wrote:
> > > On Sun, Sep 22, 2019 at 5:37 AM Michael S. Tsirkin <mst@redhat.com> wrote:
> > > >
> > > > On Fri, Sep 20, 2019 at 11:58:43AM -0700, Matthew Cover wrote:
> > > > > Treat a negative return from a TUNSETSTEERINGEBPF bpf prog as a signal
> > > > > to fallback to tun_automq_select_queue() for tx queue selection.
> > > > >
> > > > > Compilation of this exact patch was tested.
> > > > >
> > > > > For functional testing 3 additional printk()s were added.
> > > > >
> > > > > Functional testing results (on 2 txq tap device):
> > > > >
> > > > > [Fri Sep 20 18:33:27 2019] ========== tun no prog ==========
> > > > > [Fri Sep 20 18:33:27 2019] tuntap: tun_ebpf_select_queue() returned '-1'
> > > > > [Fri Sep 20 18:33:27 2019] tuntap: tun_automq_select_queue() ran
> > > > > [Fri Sep 20 18:33:27 2019] ========== tun prog -1 ==========
> > > > > [Fri Sep 20 18:33:27 2019] tuntap: bpf_prog_run_clear_cb() returned '-1'
> > > > > [Fri Sep 20 18:33:27 2019] tuntap: tun_ebpf_select_queue() returned '-1'
> > > > > [Fri Sep 20 18:33:27 2019] tuntap: tun_automq_select_queue() ran
> > > > > [Fri Sep 20 18:33:27 2019] ========== tun prog 0 ==========
> > > > > [Fri Sep 20 18:33:27 2019] tuntap: bpf_prog_run_clear_cb() returned '0'
> > > > > [Fri Sep 20 18:33:27 2019] tuntap: tun_ebpf_select_queue() returned '0'
> > > > > [Fri Sep 20 18:33:27 2019] ========== tun prog 1 ==========
> > > > > [Fri Sep 20 18:33:27 2019] tuntap: bpf_prog_run_clear_cb() returned '1'
> > > > > [Fri Sep 20 18:33:27 2019] tuntap: tun_ebpf_select_queue() returned '1'
> > > > > [Fri Sep 20 18:33:27 2019] ========== tun prog 2 ==========
> > > > > [Fri Sep 20 18:33:27 2019] tuntap: bpf_prog_run_clear_cb() returned '2'
> > > > > [Fri Sep 20 18:33:27 2019] tuntap: tun_ebpf_select_queue() returned '0'
> > > > >
> > > > > Signed-off-by: Matthew Cover <matthew.cover@stackpath.com>
> > > >
> > > >
> > > > Could you add a bit more motivation data here?
> > >
> > > Thank you for these questions Michael.
> > >
> > > I'll plan on adding the below information to the
> > > commit message and submitting a v2 of this patch
> > > when net-next reopens. In the meantime, it would
> > > be very helpful to know if these answers address
> > > some of your concerns.
> > >
> > > > 1. why is this a good idea
> > >
> > > This change allows TUNSETSTEERINGEBPF progs to
> > > do any of the following.
> > > 1. implement queue selection for a subset of
> > > traffic (e.g. special queue selection logic
> > > for ipv4, but return negative and use the
> > > default automq logic for ipv6)
> > > 2. determine there isn't sufficient information
> > > to do proper queue selection; return
> > > negative and use the default automq logic
> > > for the unknown
> > > 3. implement a noop prog (e.g. do
> > > bpf_trace_printk() then return negative and
> > > use the default automq logic for everything)
> > >
> > > > 2. how do we know existing userspace does not rely on existing behaviour
> > >
> > > Prior to this change a negative return from a
> > > TUNSETSTEERINGEBPF prog would have been cast
> > > into a u16 and traversed netdev_cap_txqueue().
> > >
> > > In most cases netdev_cap_txqueue() would have
> > > found this value to exceed real_num_tx_queues
> > > and queue_index would be updated to 0.
> > >
> > > It is possible that a TUNSETSTEERINGEBPF prog
> > > return a negative value which when cast into a
> > > u16 results in a positive queue_index less than
> > > real_num_tx_queues. For example, on x86_64, a
> > > return value of -65535 results in a queue_index
> > > of 1; which is a valid queue for any multiqueue
> > > device.
> > >
> > > It seems unlikely, however as stated above is
> > > unfortunately possible, that existing
> > > TUNSETSTEERINGEBPF programs would choose to
> > > return a negative value rather than return the
> > > positive value which holds the same meaning.
> > >
> > > It seems more likely that future
> > > TUNSETSTEERINGEBPF programs would leverage a
> > > negative return and potentially be loaded into
> > > a kernel with the old behavior.
> >
> > OK if we are returning a special
> > value, shouldn't we limit it? How about a special
> > value with this meaning?
> > If we are changing an ABI let's at least make it
> > extensible.
> >
>
> A special value with this meaning sounds
> good to me. I'll plan on adding a define
> set to -1 to cause the fallback to automq.
>
> The way I was initially viewing the old
> behavior was that returning negative was
> undefined; it happened to have the
> outcomes I walked through, but not
> necessarily by design.
>
> In order to keep the new behavior
> extensible, how should we state that a
> negative return other than -1 is
> undefined and therefore subject to
> change. Is something like this
> sufficient?
>
> Documentation/networking/tc-actions-env-rules.txt
>
> Additionally, what should the new
> behavior implement when a negative other
> than -1 is returned? I would like to have
> it do the same thing as -1 for now, but
> with the understanding that this behavior
> is undefined. Does this sound reasonable?
>
> > > > 3. why doesn't userspace need a way to figure out whether it runs on a kernel with and
> > > > without this patch
> > >
> > > There may be some value in exposing this fact
> > > to the ebpf prog loader. What is the standard
> > > practice here, a define?
> >
> >
> > We'll need something at runtime - people move binaries between kernels
> > without rebuilding then. An ioctl is one option.
> > A sysfs attribute is another, an ethtool flag yet another.
> > A combination of these is possible.
> >
> > And if we are doing this anyway, maybe let userspace select
> > the new behaviour? This way we can stay compatible with old
> > userspace...
> >
>
> Understood. I'll look into adding an
> ioctl to activate the new behavior. And
> perhaps a method of checking which is
> behavior is currently active (in case we
> ever want to change the default, say
> after some suitably long transition
> period).
>

Unless of course we can simply state via
documentation that any negative return
for which a define doesn't exist is
undefined behavior. In which case,
there is no old vs new behavior and
no need for an ioctl. Simply the
understanding provided by the
documentation.

> > > >
> > > >
> > > > thanks,
> > > > MST
> > > >
> > > > > ---
> > > > > drivers/net/tun.c | 20 +++++++++++---------
> > > > > 1 file changed, 11 insertions(+), 9 deletions(-)
> > > > >
> > > > > diff --git a/drivers/net/tun.c b/drivers/net/tun.c
> > > > > index aab0be4..173d159 100644
> > > > > --- a/drivers/net/tun.c
> > > > > +++ b/drivers/net/tun.c
> > > > > @@ -583,35 +583,37 @@ static u16 tun_automq_select_queue(struct tun_struct *tun, struct sk_buff *skb)
> > > > > return txq;
> > > > > }
> > > > >
> > > > > -static u16 tun_ebpf_select_queue(struct tun_struct *tun, struct sk_buff *skb)
> > > > > +static int tun_ebpf_select_queue(struct tun_struct *tun, struct sk_buff *skb)
> > > > > {
> > > > > struct tun_prog *prog;
> > > > > u32 numqueues;
> > > > > - u16 ret = 0;
> > > > > + int ret = -1;
> > > > >
> > > > > numqueues = READ_ONCE(tun->numqueues);
> > > > > if (!numqueues)
> > > > > return 0;
> > > > >
> > > > > + rcu_read_lock();
> > > > > prog = rcu_dereference(tun->steering_prog);
> > > > > if (prog)
> > > > > ret = bpf_prog_run_clear_cb(prog->prog, skb);
> > > > > + rcu_read_unlock();
> > > > >
> > > > > - return ret % numqueues;
> > > > > + if (ret >= 0)
> > > > > + ret %= numqueues;
> > > > > +
> > > > > + return ret;
> > > > > }
> > > > >
> > > > > static u16 tun_select_queue(struct net_device *dev, struct sk_buff *skb,
> > > > > struct net_device *sb_dev)
> > > > > {
> > > > > struct tun_struct *tun = netdev_priv(dev);
> > > > > - u16 ret;
> > > > > + int ret;
> > > > >
> > > > > - rcu_read_lock();
> > > > > - if (rcu_dereference(tun->steering_prog))
> > > > > - ret = tun_ebpf_select_queue(tun, skb);
> > > > > - else
> > > > > + ret = tun_ebpf_select_queue(tun, skb);
> > > > > + if (ret < 0)
> > > > > ret = tun_automq_select_queue(tun, skb);
> > > > > - rcu_read_unlock();
> > > > >
> > > > > return ret;
> > > > > }
> > > > > --
> > > > > 1.8.3.1

\
 
 \ /
  Last update: 2019-09-23 00:47    [W:0.211 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site