lkml.org 
[lkml]   [2019]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/5] clk: meson: meson8b: don't register the XTAL clock when provided via OF
Date
The XTAL clock is an actual crystal on the PCB. Thus the meson8b clock
driver should not register the XTAL clock - instead it should be
provided via .dts and then passed to the clock controller.

Skip the registration of the XTAL clock if a parent clock is provided
via OF. Fall back to registering the XTAL clock if this is not the case
to keep support for old .dtbs.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/clk/meson/meson8b.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index b785b67baf2b..15ec14fde2a0 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -3682,10 +3682,16 @@ static void __init meson8b_clkc_init_common(struct device_node *np,
meson8b_clk_regmaps[i]->map = map;

/*
- * register all clks
- * CLKID_UNUSED = 0, so skip it and start with CLKID_XTAL = 1
+ * always skip CLKID_UNUSED and also skip XTAL if the .dtb provides the
+ * XTAL clock as input.
*/
- for (i = CLKID_XTAL; i < CLK_NR_CLKS; i++) {
+ if (of_clk_get_parent_count(np))
+ i = CLKID_PLL_FIXED;
+ else
+ i = CLKID_XTAL;
+
+ /* register all clks */
+ for (; i < CLK_NR_CLKS; i++) {
/* array might be sparse */
if (!clk_hw_onecell_data->hws[i])
continue;
--
2.23.0
\
 
 \ /
  Last update: 2019-09-21 17:13    [W:0.238 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site