lkml.org 
[lkml]   [2019]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH RFC 05/14] dt-bindings/interrupt-controller: pdc: add SPI config register
From
Date
On 02/09/2019 14:38, Rob Herring wrote:
> On Thu, Aug 29, 2019 at 12:11:54PM -0600, Lina Iyer wrote:
>> In addition to configuring the PDC, additional registers that interface
>> the GIC have to be configured to match the GPIO type. The registers on
>> some QCOM SoCs are access restricted, while on other SoCs are not. They
>> SoCs with access restriction to these SPI registers need to be written
>
> Took me a minute to figure out this is GIC SPI interrupts, not SPI bus.
>
>> from the firmware using the SCM interface. Add a flag to indicate if the
>> register is to be written using SCM interface.
>>
>> Cc: devicetree@vger.kernel.org
>> Signed-off-by: Lina Iyer <ilina@codeaurora.org>
>> ---
>> .../bindings/interrupt-controller/qcom,pdc.txt | 9 ++++++++-
>> 1 file changed, 8 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
>> index 8e0797cb1487..852fcba98ea6 100644
>> --- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
>> +++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
>> @@ -50,15 +50,22 @@ Properties:
>> The second element is the GIC hwirq number for the PDC port.
>> The third element is the number of interrupts in sequence.
>>
>> +- qcom,scm-spi-cfg:
>> + Usage: optional
>> + Value type: <bool>
>> + Definition: Specifies if the SPI configuration registers have to be
>> + written from the firmware.
>> +
>> Example:
>>
>> pdc: interrupt-controller@b220000 {
>> compatible = "qcom,sdm845-pdc";
>> - reg = <0xb220000 0x30000>;
>> + reg = <0xb220000 0x30000>, <0x179900f0 0x60>;
>
> There needs to be a description for reg updated. These aren't GIC
> registers are they? Because those go in the GIC node.

This is completely insane. Why are the GIC registers configured as
secure the first place, if they are expected to be in control of the
non-secure?

M.
--
Jazz is not dead. It just smells funny...

\
 
 \ /
  Last update: 2019-09-02 15:54    [W:0.085 / U:0.216 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site