lkml.org 
[lkml]   [2019]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4 1/9] dt-bindings: i2c: at91: add new compatible
Date
On 2019-09-02 12:11, Eugen.Hristev@microchip.com wrote:
> From: Eugen Hristev <eugen.hristev@microchip.com>
>
> Add compatible for new Microchip SoC, sam9x60
>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
> ---
> Documentation/devicetree/bindings/i2c/i2c-at91.txt | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
> index b7cec17..2210f43 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
> @@ -3,7 +3,8 @@ I2C for Atmel platforms
> Required properties :
> - compatible : Must be "atmel,at91rm9200-i2c", "atmel,at91sam9261-i2c",
> "atmel,at91sam9260-i2c", "atmel,at91sam9g20-i2c", "atmel,at91sam9g10-i2c",
> - "atmel,at91sam9x5-i2c", "atmel,sama5d4-i2c" or "atmel,sama5d2-i2c"
> + "atmel,at91sam9x5-i2c", "atmel,sama5d4-i2c", "atmel,sama5d2-i2c" or
> + "microchip,sam9x60-i2c"

IIUC, this list should ideally be reformatted with one compatible per line.

Side note; unfortunate naming with SAM9x60, when there is a preexisting 9260
fitting the "wildcard" (AFAICT, it's not a wildcard in this case, but it sure
looks like one).

Cheers,
Peter

> - reg: physical base address of the controller and length of memory mapped
> region.
> - interrupts: interrupt number to the cpu.
>

\
 
 \ /
  Last update: 2019-09-02 12:45    [W:0.845 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site