lkml.org 
[lkml]   [2019]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dt-bindings: display: imx: fix native-mode setting
Date
According to
Documentation/devicetree/bindings/display/panel/display-timing.txt,
native-mode is a property of the display-timings node.

If it's located outside of display-timings, the native-mode setting is
ignored and the first display timing is used.

We've already fixed the board definitions which got this wrong. Fix the
example in the imx framebuffer bindings as well.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
---
Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
index e5a8b363d829..f4df9e83bcd2 100644
--- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
@@ -38,10 +38,10 @@ Example:

display0: display0 {
model = "Primeview-PD050VL1";
- native-mode = <&timing_disp0>;
bits-per-pixel = <16>;
fsl,pcr = <0xf0c88080>; /* non-standard but required */
display-timings {
+ native-mode = <&timing_disp0>;
timing_disp0: 640x480 {
hactive = <640>;
vactive = <480>;
--
2.11.0
\
 
 \ /
  Last update: 2019-09-18 21:41    [W:0.079 / U:1.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site