lkml.org 
[lkml]   [2019]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 bpf-next 07/14] samples: bpf: add makefile.target for separate CC target build
On Mon, Sep 16, 2019 at 3:58 AM Ivan Khoronzhuk
<ivan.khoronzhuk@linaro.org> wrote:
>
> The makefile.target is added only and will be used in

typo: Makefile

> sample/bpf/Makefile later in order to switch cross-compiling on CC

on -> to

> from HOSTCC environment.
>
> The HOSTCC is supposed to build binaries and tools running on the host
> afterwards, in order to simplify build or so, like "fixdep" or else.
> In case of cross compiling "fixdep" is executed on host when the rest
> samples should run on target arch. In order to build binaries for
> target arch with CC and tools running on host with HOSTCC, lets add
> Makefile.target for simplicity, having definition and routines similar
> to ones, used in script/Makefile.host. This allows later add
> cross-compilation to samples/bpf with minimum changes.
>
> The tprog stands for target programs built with CC.

Why tprog? Could we just use prog: hostprog vs prog.

>
> Makefile.target contains only stuff needed for samples/bpf, potentially
> can be reused later and now needed only for unblocking tricky
> samples/bpf cross compilation.
>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
> ---
> samples/bpf/Makefile.target | 75 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 75 insertions(+)
> create mode 100644 samples/bpf/Makefile.target
>
> diff --git a/samples/bpf/Makefile.target b/samples/bpf/Makefile.target
> new file mode 100644
> index 000000000000..fb6de63f7d2f
> --- /dev/null
> +++ b/samples/bpf/Makefile.target
> @@ -0,0 +1,75 @@
> +# SPDX-License-Identifier: GPL-2.0
> +# ==========================================================================
> +# Building binaries on the host system
> +# Binaries are not used during the compilation of the kernel, and intendent

typo: intended

> +# to be build for target board, target board can be host ofc. Added to build

What's ofc, is it "of course"?

> +# binaries to run not on host system.
> +#
> +# Sample syntax (see Documentation/kbuild/makefiles.rst for reference)
> +# tprogs-y := xsk_example
> +# Will compile xdpsock_example.c and create an executable named xsk_example

You mix references to xsk_example and xdpsock_example, which is very
confusing. I'm guessing you meant to use xdpsock_example consistently.

> +#
> +# tprogs-y := xdpsock
> +# xdpsock-objs := xdpsock_1.o xdpsock_2.o
> +# Will compile xdpsock_1.c and xdpsock_2.c, and then link the executable
> +# xdpsock, based on xdpsock_1.o and xdpsock_2.o
> +#
> +# Inherited from scripts/Makefile.host

"Inspired by" or "Derived from" would be probably more appropriate term :)

> +#
> +__tprogs := $(sort $(tprogs-y))
> +
> +# C code
> +# Executables compiled from a single .c file
> +tprog-csingle := $(foreach m,$(__tprogs), \
> + $(if $($(m)-objs),,$(m)))
> +
> +# C executables linked based on several .o files
> +tprog-cmulti := $(foreach m,$(__tprogs),\
> + $(if $($(m)-objs),$(m)))
> +
> +# Object (.o) files compiled from .c files
> +tprog-cobjs := $(sort $(foreach m,$(__tprogs),$($(m)-objs)))
> +
> +tprog-csingle := $(addprefix $(obj)/,$(tprog-csingle))
> +tprog-cmulti := $(addprefix $(obj)/,$(tprog-cmulti))
> +tprog-cobjs := $(addprefix $(obj)/,$(tprog-cobjs))
> +
> +#####
> +# Handle options to gcc. Support building with separate output directory
> +
> +_tprogc_flags = $(TPROGS_CFLAGS) \
> + $(TPROGCFLAGS_$(basetarget).o)
> +
> +# $(objtree)/$(obj) for including generated headers from checkin source files
> +ifeq ($(KBUILD_EXTMOD),)
> +ifdef building_out_of_srctree
> +_tprogc_flags += -I $(objtree)/$(obj)
> +endif
> +endif
> +
> +tprogc_flags = -Wp,-MD,$(depfile) $(_tprogc_flags)
> +
> +# Create executable from a single .c file
> +# tprog-csingle -> Executable
> +quiet_cmd_tprog-csingle = CC $@
> + cmd_tprog-csingle = $(CC) $(tprogc_flags) $(TPROGS_LDFLAGS) -o $@ $< \
> + $(TPROGS_LDLIBS) $(TPROGLDLIBS_$(@F))
> +$(tprog-csingle): $(obj)/%: $(src)/%.c FORCE
> + $(call if_changed_dep,tprog-csingle)
> +
> +# Link an executable based on list of .o files, all plain c
> +# tprog-cmulti -> executable
> +quiet_cmd_tprog-cmulti = LD $@
> + cmd_tprog-cmulti = $(CC) $(tprogc_flags) $(TPROGS_LDFLAGS) -o $@ \
> + $(addprefix $(obj)/,$($(@F)-objs)) \
> + $(TPROGS_LDLIBS) $(TPROGLDLIBS_$(@F))
> +$(tprog-cmulti): $(tprog-cobjs) FORCE
> + $(call if_changed,tprog-cmulti)
> +$(call multi_depend, $(tprog-cmulti), , -objs)
> +
> +# Create .o file from a single .c file
> +# tprog-cobjs -> .o
> +quiet_cmd_tprog-cobjs = CC $@
> + cmd_tprog-cobjs = $(CC) $(tprogc_flags) -c -o $@ $<
> +$(tprog-cobjs): $(obj)/%.o: $(src)/%.c FORCE
> + $(call if_changed_dep,tprog-cobjs)
> --
> 2.17.1
>

tprogs is quite confusing, but overall looks good to me.

\
 
 \ /
  Last update: 2019-09-18 01:21    [W:0.205 / U:3.068 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site