lkml.org 
[lkml]   [2019]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 2/2] dt-bindings: net: dwmac: document 'mac-mode' property
Date
On Mon, 2019-09-16 at 12:49 +0300, Alexandru Ardelean wrote:
> On Fri, 2019-09-13 at 15:36 +0100, Rob Herring wrote:
> > [External]
> >
> > On Fri, Sep 06, 2019 at 04:02:56PM +0300, Alexandru Ardelean wrote:
> > > This change documents the 'mac-mode' property that was introduced in
> > > the
> > > 'stmmac' driver to support passive mode converters that can sit in-
> > > between
> > > the MAC & PHY.
> > >
> > > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
> > > ---
> > > Documentation/devicetree/bindings/net/snps,dwmac.yaml | 8 ++++++++
> > > 1 file changed, 8 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> > > b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> > > index c78be15704b9..ebe4537a7cce 100644
> > > --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> > > +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> > > @@ -112,6 +112,14 @@ properties:
> > > reset-names:
> > > const: stmmaceth
> > >
> > > + mac-mode:
> > > + maxItems: 1
> >
> > Is this an array because {min,max}Items is for arrays? It should be
> > defined as a string with possible values.
> >
> > As this property is the same as another, you can do this:
> >
> > $ref: ethernet-controller.yaml#/properties/phy-connection-type
> >
> > Unless only a small subset of those values are valid here, then you
> > may
> > want to list them here.
> >
>
> Ack.
> Thank you.
>
> Will investigate and re-spin.

Looking at '$ref: ethernet-controller.yaml#/properties/phy-connection-type'
it looks like 'mac-mode' could cover almost all 'phy-connection-type'
except for a few (1 or 2). The 'dwmac' driver is pretty complex/big.

There was a note that Andrew made on a previous change, that we could have
a 'mac-mode' (similar to 'phy-mode') and that could become generic (either
in phylib or maybe somewhere else in netdev).

In any case, the conclusion [from my side] would be that
'$ref: ethernet-controller.yaml#/properties/phy-connection-type'
could work, and be sufficiently future-proof.

Thanks
Alex

>
>
> > > + description:
> > > + The property is identical to 'phy-mode', and assumes that
> > > there is mode
> > > + converter in-between the MAC & PHY (e.g. GMII-to-RGMII). This
> > > converter
> > > + can be passive (no SW requirement), and requires that the MAC
> > > operate
> > > + in a different mode than the PHY in order to function.
> > > +
> > > snps,axi-config:
> > > $ref: /schemas/types.yaml#definitions/phandle
> > > description:
> > > --
> > > 2.20.1
> > >
\
 
 \ /
  Last update: 2019-09-17 09:23    [W:0.181 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site