lkml.org 
[lkml]   [2019]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 34/49] input: atmel_mxt_ts: export GPIO reset line via sysfs
Date
From: "George G. Davis" <george_davis@mentor.com>

N.B. Modifying the atmel_mxt_ts GPIO reset line during operation will
cause problems with normal driver operation. This feature is provided
as a diagnostic debug aid. It does not take into consideration any
pending operations which may be in progress. Modifying the atmel_mxt_ts
GPIO reset line at any time will inevitably cause the driver to fail.

Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Rajeev Kumar <rajeev_kumar@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index bdc5088baea8..4670880e52a2 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -4086,6 +4086,19 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
return error;
}

+ if (data->reset_gpio) {
+ error = gpiod_export(data->reset_gpio, 0);
+ if (error)
+ return error;
+
+ error = gpiod_export_link(&client->dev, "reset",
+ data->reset_gpio);
+ if (error) {
+ gpiod_unexport(data->reset_gpio);
+ return error;
+ }
+ }
+
if (data->suspend_mode == MXT_SUSPEND_REGULATOR) {
error = mxt_acquire_irq(data);
if (error)
@@ -4118,6 +4131,10 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
err_free_object:
mxt_free_input_device(data);
mxt_free_object_table(data);
+ if (data->reset_gpio) {
+ sysfs_remove_link(&client->dev.kobj, "reset");
+ gpiod_unexport(data->reset_gpio);
+ }
return error;
}

@@ -4127,6 +4144,10 @@ static int mxt_remove(struct i2c_client *client)

disable_irq(data->irq);
sysfs_remove_group(&client->dev.kobj, &mxt_fw_attr_group);
+ if (data->reset_gpio) {
+ sysfs_remove_link(&client->dev.kobj, "reset");
+ gpiod_unexport(data->reset_gpio);
+ }
mxt_debug_msg_remove(data);
mxt_sysfs_remove(data);
mxt_free_input_device(data);
--
2.19.2
\
 
 \ /
  Last update: 2019-09-17 11:42    [W:0.050 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site