lkml.org 
[lkml]   [2019]   [Sep]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v3] input: keyboard: snvs_pwrkey: Send key events for i.MX6 S, DL and Q
On Mon, Sep 16, 2019 at 07:45:37AM +0000, Robin Gong wrote:
> On 2019/9/13 15:31 robin <robin@protonic.nl> wrote:>
> > Hi Dmitry,
> >
> > On 2019-09-12 22:13, Dmitry Torokhov wrote:
> > > Hi Robin,
> > >
> > > On Wed, Sep 04, 2019 at 06:23:29AM +0000, Robin van der Gracht wrote:
> > >> The first generation i.MX6 processors does not send an interrupt when
> > >> the power key is pressed. It sends a power down request interrupt if
> > >> the key is released before a hard shutdown (5 second press). This
> > >> should allow software to bring down the SoC safely.
> > >>
> > >> For this driver to work as a regular power key with the older SoCs,
> > >> we need to send a keypress AND release when we get the power down
> > >> request irq.
> > >>
> > >> Signed-off-by: Robin van der Gracht <robin@protonic.nl>
> > >> ---
> > >> @@ -67,13 +83,17 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int
> > >> irq, void *dev_id) {
> > >> struct platform_device *pdev = dev_id;
> > >> struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
> > >> + unsigned long expire = jiffies;
> > >> u32 lp_status;
> > >>
> > >> pm_wakeup_event(pdata->input->dev.parent, 0);
> > >>
> > >> regmap_read(pdata->snvs, SNVS_LPSR_REG, &lp_status);
> > >> - if (lp_status & SNVS_LPSR_SPO)
> > >> - mod_timer(&pdata->check_timer, jiffies +
> > >> msecs_to_jiffies(DEBOUNCE_TIME));
> > >> + if (lp_status & SNVS_LPSR_SPO) {
> > >> + if (pdata->minor_rev > 0)
> > >> + expire = jiffies + msecs_to_jiffies(DEBOUNCE_TIME);
> > >> + mod_timer(&pdata->check_timer, expire);
> > >
> > > Why do we even need to fire the timer in case of the first generation
> > > hardware? Just send press and release events directly from the ISR.
> That timer looks like a software debounce to prevent unexpected and
> meaningless interrupt/event caused by quick press/release.

Right, but in case of the first generation hardware we schedule the
timer immediately (expire == 0) and do not check state of the hardware
in the timer handler, but rather simply emit down/up events, so we do
not really get any benefit from the timer (again, I am talking about
first generation hardware only).

Thanks.

--
Dmitry

\
 
 \ /
  Last update: 2019-09-17 01:38    [W:0.106 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site