lkml.org 
[lkml]   [2019]   [Sep]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 2/2] clk: at91: select parent if main oscillator or bypass is enabled
Date
Quoting Eugen.Hristev@microchip.com (2019-09-09 08:30:34)
> From: Eugen Hristev <eugen.hristev@microchip.com>
>
> Selecting the right parent for the main clock is done using only
> main oscillator enabled bit.
> In case we have this oscillator bypassed by an external signal (no driving
> on the XOUT line), we still use external clock, but with BYPASS bit set.
> So, in this case we must select the same parent as before.
> Create a macro that will select the right parent considering both bits from
> the MOR register.
> Use this macro when looking for the right parent.
>
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
> ---

Applied to clk-next

\
 
 \ /
  Last update: 2019-09-16 22:16    [W:0.080 / U:36.720 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site