lkml.org 
[lkml]   [2019]   [Sep]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 1/9] leds: multicolor: Add sysfs interface definition
From
Date
Dan,

On 9/16/19 3:56 PM, Dan Murphy wrote:
> Hello
>
> On 9/15/19 8:57 AM, Jacek Anaszewski wrote:
>> Hi Dan,
>>
>> On 9/11/19 8:01 PM, Dan Murphy wrote:
>>> Add a documentation of LED Multicolor LED class specific
>>> sysfs attributes.
>>>
>>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>>> ---
>>>   .../ABI/testing/sysfs-class-led-multicolor    | 73 +++++++++++++++++++
>>>   1 file changed, 73 insertions(+)
>>>   create mode 100644
>>> Documentation/ABI/testing/sysfs-class-led-multicolor
>>>
>>> diff --git a/Documentation/ABI/testing/sysfs-class-led-multicolor
>>> b/Documentation/ABI/testing/sysfs-class-led-multicolor
>>> new file mode 100644
>>> index 000000000000..4ea54c2ad4c8
>>> --- /dev/null
>>> +++ b/Documentation/ABI/testing/sysfs-class-led-multicolor
>>> @@ -0,0 +1,73 @@
>>> +What:        /sys/class/leds/<led>/brightness
>>> +Date:        Sept 2019
>>> +KernelVersion:    5.5
>>> +Contact:    Dan Murphy <dmurphy@ti.com>
>>> +Description:    read/write
>>> +        The multicolor class will redirect the device drivers call back
>>> +        function for brightness control to the multicolor class
>>> +        brightness control function.
>>> +
>>> +        Writing to this file will update all LEDs within the group to a
>>> +        calculated percentage of what each color LED in the group is
>>> set
>>> +        to.  The percentage is calculated via the equation below:
>>> +
>>> +        led_brightness = requested_value *
>>> led_color_intensity/led_color_max_intensity
>>> +
>>> +        For additional details please refer to
>>> +        Documentation/leds/leds-class-multicolor.rst.
>>> +
>>> +        The value of the color is from 0 to
>>> +        /sys/class/leds/<led>/max_brightness.
>>> +
>>> +What:        /sys/class/leds/<led>/colors/color_mix
>>> +Date:        Sept 2019
>>> +KernelVersion:    5.5
>>> +Contact:    Dan Murphy <dmurphy@ti.com>
>>> +Description:    read/write
>>> +        The values written to this file should contain the intensity
>>> +        values of each multicolor LED within the colors directory. The
>>> +        index of given color is reported by the color_id file
>>> present in
>>> +        colors/<color> directory. The index determines the position in
>>> +        the sequence of    intensities on which the related intensity
>>> +        should be passed to this file.
>>> +
>>> +        For additional details please refer to
>>> +        Documentation/leds/leds-class-multicolor.rst.
>> As already mentioned in the reply to Pavel - let's avoid the
>> introduction of another sysfs file with multiple values.
>
> OK for clarification remove the color_mix and color_id files and keep
> the intensity files?

Exactly.

--
Best regards,
Jacek Anaszewski

\
 
 \ /
  Last update: 2019-09-16 20:33    [W:0.123 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site