lkml.org 
[lkml]   [2019]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [Patch 3/6] media: dt-bindings: ov2659: add powerdown-gpios optional property
Hi Benoit,

Thank you for the patch.

On Thu, Sep 12, 2019 at 1:58 PM Benoit Parrot <bparrot@ti.com> wrote:
>
> Add powerdown-gpios to the list of optional properties for the OV2659
> camera sensor.
>
> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> ---
> Documentation/devicetree/bindings/media/i2c/ov2659.txt | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov2659.txt b/Documentation/devicetree/bindings/media/i2c/ov2659.txt
> index cabc7d827dfb..f55204cce0cd 100644
> --- a/Documentation/devicetree/bindings/media/i2c/ov2659.txt
> +++ b/Documentation/devicetree/bindings/media/i2c/ov2659.txt
> @@ -12,6 +12,10 @@ Required Properties:
> - clock-names: should be "xvclk".
> - link-frequencies: target pixel clock frequency.
>
> +Optional Properties:
> +- powerdown-gpios: reference to the GPIO connected to the pwdn pin, if any.
> + Active is low.
> +
as per the datasheet this should be active high with pull-down resistor.

Cheers,
--Prabhakar Lad

\
 
 \ /
  Last update: 2019-09-14 12:12    [W:0.306 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site