lkml.org 
[lkml]   [2019]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] dt-bindings: timer: Convert Exynos MCT bindings to json-schema
On Mon, Sep 09, 2019 at 06:25:37PM +0200, Krzysztof Kozlowski wrote:
> Convert Samsung Exynos Soc Multi Core Timer bindings to DT schema format
> using json-schema.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> .../bindings/timer/samsung,exynos4210-mct.txt | 88 --------------
> .../timer/samsung,exynos4210-mct.yaml | 115 ++++++++++++++++++
> 2 files changed, 115 insertions(+), 88 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
> create mode 100644 Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml


> diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
> new file mode 100644
> index 000000000000..b96d2877955f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
> @@ -0,0 +1,115 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/timer/samsung,exynos4210-mct.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung Exynos SoC Multi Core Timer (MCT)
> +
> +maintainers:
> + - Krzysztof Kozlowski <krzk@kernel.org>
> +
> +description: |+
> + The Samsung's Multi Core Timer (MCT) module includes two main blocks, the
> + global timer and CPU local timers. The global timer is a 64-bit free running
> + up-counter and can generate 4 interrupts when the counter reaches one of the
> + four preset counter values. The CPU local timers are 32-bit free running
> + down-counters and generate an interrupt when the counter expires. There is
> + one CPU local timer instantiated in MCT for every CPU in the system.
> +
> +properties:
> + compatible:
> + enum:
> + - samsung,exynos4210-mct
> + - samsung,exynos4412-mct
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + description: |
> + Interrupts should be put in specific order. This is, the local timer
> + interrupts should be specified after the four global timer interrupts
> + have been specified:
> + 0: Global Timer Interrupt 0
> + 1: Global Timer Interrupt 1
> + 2: Global Timer Interrupt 2
> + 3: Global Timer Interrupt 3
> + 4: Local Timer Interrupt 0
> + 5: Local Timer Interrupt 1
> + 6: ..
> + 7: ..
> + i: Local Timer Interrupt n
> + For MCT block that uses a per-processor interrupt for local timers, such
> + as ones compatible with "samsung,exynos4412-mct", only one local timer
> + interrupt might be specified, meaning that all local timers use the same
> + per processor interrupt.
> + minItems: 5 # 4 Global + 1 local
> + maxItems: 20 # 4 Global + 16 local
> +
> +required:
> + - compatible
> + - interrupts
> + - reg
> +
> +examples:
> + - |
> + // In this example, the IP contains two local timers, using separate
> + // interrupts, so two local timer interrupts have been specified,
> + // in addition to four global timer interrupts.
> + mct@10050000 {

Can we clean this up and use 'timer' here.

> + compatible = "samsung,exynos4210-mct";
> + reg = <0x10050000 0x800>;
> + interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
> + <0 42 0>, <0 48 0>;
> + };
> +
> + - |
> + // In this example, the timer interrupts are connected to two separate
> + // interrupt controllers. Hence, an interrupt-map is created to map
> + // the interrupts to the respective interrupt controllers.
> +
> + mct@101c0000 {
> + compatible = "samsung,exynos4210-mct";
> + reg = <0x101C0000 0x800>;
> + interrupt-parent = <&mct_map>;
> + interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
> +
> + mct_map: mct-map {

This needs to be documented.

Note, I don't really see any reason this needs to be a child node.

> + #interrupt-cells = <1>;
> + #address-cells = <0>;
> + #size-cells = <0>;
> + interrupt-map = <0 &gic 0 57 0>,
> + <1 &gic 0 69 0>,
> + <2 &combiner 12 6>,
> + <3 &combiner 12 7>,
> + <4 &gic 0 42 0>,
> + <5 &gic 0 48 0>;
> + };
> + };
> +
> + - |
> + // In this example, the IP contains four local timers, but using
> + // a per-processor interrupt to handle them. Only one first local
> + // interrupt is specified.
> +
> + mct@10050000 {
> + compatible = "samsung,exynos4412-mct";
> + reg = <0x10050000 0x800>;
> +
> + interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
> + <0 42 0>;
> + };
> +
> + - |
> + // In this example, the IP contains four local timers, but using
> + // a per-processor interrupt to handle them. All the local timer
> + // interrupts are specified.
> +
> + mct@10050000 {
> + compatible = "samsung,exynos4412-mct";
> + reg = <0x10050000 0x800>;
> +
> + interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
> + <0 42 0>, <0 42 0>, <0 42 0>, <0 42 0>;
> + };
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2019-09-13 16:38    [W:0.031 / U:0.700 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site